The Depot Proj

Directions Website Contact the business

The Depot Proj Hand built to order tag board effects with vintage components

Also offering guitar repair, setups, and hardware swaps

Digging through stuff and found a pair of 60s AC128s that measured out perfectly for a Fuzz Face. I added a bias to it a...
11/05/2026

Digging through stuff and found a pair of 60s AC128s that measured out perfectly for a Fuzz Face. I added a bias to it as well. Stole the enclose off one of my early non working builds so I’ll have an extra hole to add a control or just cover up with a label.

Looking to trade this AD30 from the early 2000s for a head of some sort, even another AD30. But up for a lot of options.
11/02/2026

Looking to trade this AD30 from the early 2000s for a head of some sort, even another AD30. But up for a lot of options.

Ok, think I’m going to go with this. This should cover everything for both things I have going. Gotta make some cables f...
10/28/2026

Ok, think I’m going to go with this. This should cover everything for both things I have going. Gotta make some cables for it tomorrow. I may slap the power back underneath to add back a boost/overdrive but there’s some really good dirt in the MS3, so maybe stick with that.

Daredevil Pedals DIRGE ELECTRONICS WMD EarthQuaker Devices Empress Effects Strymon The Montreal Assembly Death By Audio

Buttoned up a couple I didn’t finish before surgery and are available for purchase. 2 in 1 Speaker Cranker and modified ...
10/26/2026

Buttoned up a couple I didn’t finish before surgery and are available for purchase. 2 in 1 Speaker Cranker and modified treble boost. Speaker Cranker is a 1 k**b gain, the TB is based on the Naga Viper and has volume, gain, and range of boost. SC into TB or use both independently. This one is $220. The 1 k**b is a modified Super Hard On based on the Black Eye boost by EQD. Tons and tons of volume on tap with internal trim to set the gain. This one is $110.

I’ve got a new Achilles, so you should buy a new pedal. I have 4 or 5 builds from last week that haven’t sold and are st...
10/21/2026

I’ve got a new Achilles, so you should buy a new pedal. I have 4 or 5 builds from last week that haven’t sold and are still only $100. Hit me up for one or 3.

Personal Perc
10/19/2026

Personal Perc

10/19/2026

Hybrid Tonebender from yesterday. This cleans up with the volume pot more than any Tonebender I’ve played. Or you can set the internal bias low and have a bigger range on the gain pot. It’s really good if I do say so myself.

I lied, one more build. This one will be a personal build. My favorite fuzz drive circuit, the HP2. Dug into my stash fo...
10/19/2026

I lied, one more build. This one will be a personal build. My favorite fuzz drive circuit, the HP2. Dug into my stash for the transistors and diodes on this one.

Hybrid MKiii Tonebender based around the Black Ash. Used 2 gold leg Moto M351 and a gold leg TI 2n1306 all from the 70s....
10/18/2026

Hybrid MKiii Tonebender based around the Black Ash. Used 2 gold leg Moto M351 and a gold leg TI 2n1306 all from the 70s. Thing is a ripper. I may mess with some old 2n2222 in there and my favorite NP891, but these were all low/mid gain with the M351 around 80hfe and the 2n1306 at 111.

About to head to my MRI for pre op. Decided to build out a board. Was going to do a huge drive, but decided to do a 1 k*...
10/13/2026

About to head to my MRI for pre op. Decided to build out a board. Was going to do a huge drive, but decided to do a 1 k**b weirdo first.

Address

824 SW 27th Street
Moore, OK
73160

Alerts

Be the first to know and let us send you an email when The Depot Proj posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Depot Proj:

Shortcuts

Share

Nearby shops