09/09/2025
Hey Everyone!
I hope you're doing well!
In response to a few questions, I wanted to do a shorter brief of some of the services I offer.
Obviously, I'm a fi****ms dealer and manufacturer, but I'm also a Master Level certified armorer for many different companies. Add in that I'm a Master Level Gunsmith, with nearly 4 DECADES of experience, I have experience, training to offer many different levels of assistance to you!
If you haven't done so already, I recommend going to my website www.srtacc.com and check out all the different services I offer!
One of the services that I'm promoting is the INSPECTION Service for AR platform ri**es and components.
The entire reason that I'm offering this is because the AR manufacturer industry has seriously dropped in their manufacturing and quality control measures.
You should be able to purchase a complete r***e and be able to use it right out of the box without concern of function and reliability!
Unfortunately that is not the case now!
It seems now that "IF" your r***e functions, it's only a matter of time before there are problems beginning to happen.
The AR platform has been around for many years, and has gone through many changes and upgrades over time.
The problem now is there are MANY AR manufacturers that are producing ri**es. And in the process of production, they are not following the prints and or using proper components that are produced with inferior materials.
Even the literal manufacturing process is suffering.
The machining isn't to specification, and correct tolerances (measurements) are not being followed.
Add all that up, but also don't forget that quality control isn't catching poor machining, poor assembly, and you have a recipe for a r***e that will be problematic.
I want to ELIMINATE that for you!
The INSPECTION SERVICES cover both complete NEW / and or used ri**es as well as ALL the components of the AR.
Think of the process of "Blueprinting" a high performance engine.
Basically it comes down to this.....
You send me a complete r***e, I will completely disassemble it, I will check every single component, measure / gauge and document the findings. I use the actual TDP (Technical Data Package) for the M16 / M4 Blueprints and compare your components against the TDP.
Once the complete inspection is conducted, I'll contact you with a brief of the findings and discuss changes that may need to be made prior to reassembling your r***e to proper specifications.
**There is a test firing schedule done before disassembly and then again after final assembly. Complete details are discussed on the website!**
Individual components Inspections:
The same attention to detail is conducted with individual components, such as a stripped upper or lower receiver.
Every components can be inspected and checked against the TDP.
All the findings are annotated for the owner!
This is a very simple description of a very in-depth process that we follow to make certain your r***e or components are something you can depend on!
I'm sure there will be questions, and I welcome them!
So feel free to ask on here, or on the website contact form.
Jeff / SRT ARMORER / SeniorTac OUT
Type 7 FFL - SOT 2 Dealer and Manufacturer Master Level Armorer and Gunsmith Master Instructor
