10/05/2026
▪️How to solder jump rings on a chain
1. Place the jump ring in your third-hand so the seam is visible and ends meet.
2. Touch a tiny bit of flux to the joint.
3. Add a small piece of easy solder on the seam.
4. Light your sharp-tip micro torch and heat only the joint with a medium flame — keep the flame moving.
5. Watch for the solder to flow and bridge the gap; remove the flame when it does.
6. Quench in water (or let cool briefly), then put the piece in pickle to remove scale.
7. Rinse, dry, file/buff the seam smooth, polish.
8. Inspect the join and straighten the ring if needed.
▪️Like and Follow us for more behind the scenes for all kinds of handcrafted jewelry!
▪️Link in Handcrafted Modern Jewlery
handmadejewelry smallbusiness esty sujinstudio sujinstudiojewelry statementearrings statementjewelry simplejewelry giftideas oneofakindjewelry 뉴욕뉴저지핸드메이드쥬얼리 수진스튜디오
