The GOAT by MLB

The GOAT by MLB Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from The GOAT by MLB, Gift Shop, 2301 Dave Lyle Boulevard Suite 123, Rock Hill, SC.

The GOAT by MLB is a veteran-owned and operated shop based in Rock Hill, SC, dedicated to providing high-quality goat milk soap products and custom made gifts including 3D printing.

Ever tried a filament that bends instead of snaps? 🤔 TPU is where 3D printing gets a lot more fun.TPU is a flexible fila...
09/16/2026

Ever tried a filament that bends instead of snaps? 🤔 TPU is where 3D printing gets a lot more fun.

TPU is a flexible filament, so it works great for phone cases, cable organizers, soft grips, gaskets, and other custom creations that need a little give. It feels more like rubber than rigid plastic, and that’s exactly why people love it.

A few beginner-friendly 3D Printing Tips & Tricks, print slower than PLA, keep retraction low, and make sure the filament path is guided well. Start with a small test print first. Also, keep TPU dry, moisture can ruin print quality fast.

One thing I think surprises people most is hardness. Some TPU is softer and bendier, while some holds its shape more. That choice really matters for functional prints.

Have you tried TPU yet? Drop your favorite project or best beginner tip in the comments 💬

Ever use a soap bar and your skin still feels tight after the shower? 🤔🧼 That dry, squeaky-clean feeling is not always a...
09/14/2026

Ever use a soap bar and your skin still feels tight after the shower? 🤔🧼 That dry, squeaky-clean feeling is not always a good sign.

A lot of commercial bars are really detergent bars. They foam big and smell strong, but they can wash away the natural oils your skin needs.

Goat milk soap is different. It is usually made with simpler ingredients like oils, lye, and goat milk, so the cleanse feels gentler and your skin often feels softer after you rinse.

The label matters too. If a bar says “natural,” flip it over and read the ingredients. Clear, honest ingredients usually tell you more than fancy packaging.

If your skin feels dry, itchy, or overwashed, goat milk soap may be worth a try. 💬 Have you used it before, or are you still team commercial soap?

Ever wonder what a goat remembers? 🐐 More than most people think.Goats have strong long-term memories. They can remember...
09/11/2026

Ever wonder what a goat remembers? 🐐 More than most people think.

Goats have strong long-term memories. They can remember other goats, people, and even how to solve simple problems months later. I honestly love that, because it reminds us they are paying attention all the time.

Memory helps goats know who feels safe, where food is, and what routines feel familiar. A kind moment can stay with them. So can a stressful one.

That’s why animals are never really starting from zero each day. They learn from experience, and they carry it with them.

💬 What’s something you’ll never forget, and why has it stayed with you? Share in the comments.

PLA or PETG, which one should you grab first? 🤔🧵If you’re new to 3D Printing, this choice matters more than it seems.PLA...
09/09/2026

PLA or PETG, which one should you grab first? 🤔🧵
If you’re new to 3D Printing, this choice matters more than it seems.

PLA is usually the easier start. It prints at lower temps, warps less, and gives cleaner detail, so it’s great for decor, gifts, prototypes, and lightweight custom creations.

PETG is the tougher option. It handles impact, moisture, and regular use better, which makes it a smart pick for hooks, holders, containers, and other functional prints.

The catch? PLA can soften in heat, and PETG can be fussier to dial in. I usually think of it this way: don’t ask which filament is best, ask what the print needs to do. That one question saves a lot of failed prints.

💬 Which do you use more, PLA or PETG, and why?

Dry, tight skin after washing? Your skin barrier might be asking for a gentler routine 🧴✨Your skin barrier helps keep mo...
09/07/2026

Dry, tight skin after washing? Your skin barrier might be asking for a gentler routine 🧴✨

Your skin barrier helps keep moisture in and irritation out. When it gets stressed, skin can feel flaky, rough, or extra sensitive.

That’s why a gentle cleanse matters. Goat milk soap is often a favorite because it can clean without leaving skin feeling stripped. And a good lotion helps add moisture back, especially right after bathing or washing your hands.

A simple routine really does help: wash gently, moisturize right away, and stay consistent. Hands, elbows, and legs usually need the most love.

Skin is personal, so what works for one person may not work for another. But if your goal is more comfort and less tight, itchy skin, goat milk skincare is a solid place to start.

💬 Have you tried goat milk soap or lotion? What part of your routine needs a moisture boost most?

Did you know goats usually hate being alone? 🐐 That surprised me too.Goats are social animals, and you can see it fast w...
09/04/2026

Did you know goats usually hate being alone? 🐐 That surprised me too.

Goats are social animals, and you can see it fast when they’re together. They play, follow each other around, and make all kinds of sounds to communicate. They’ve got big personalities, and honestly, they can be a little dramatic.

A goat on its own can get bored, stressed, or restless. That’s why many owners keep at least two. Companionship is a real need for them, not just a nice extra.

It’s also a good reminder that cute animals still need proper care, space, strong fencing, attention, and social interaction to stay happy and healthy.

Would you ever own a goat, or do you just love learning fun animal facts? Tell me in the comments 💬

Warping can ruin a print fast 😩 but it’s usually fixable.Most of the time, it comes down to two things, bed adhesion and...
09/02/2026

Warping can ruin a print fast 😩 but it’s usually fixable.

Most of the time, it comes down to two things, bed adhesion and uneven cooling. If your corners lift or the print curls, start with a clean bed and recheck that first layer height. A patchy first layer is often the whole problem.

Bed temp matters too. If the bed is too cool, the bottom layers shrink early and pull upward. I’ve found a slightly warmer bed and a slower first layer can save a lot of frustration.

Drafts are sneakier than people think. A fan, window, or AC vent can cool one side too fast. For stubborn prints, a brim or raft also helps hold things down. 🛠️

What’s the most annoying warp issue you’ve dealt with, and what finally fixed it? Drop your go-to tip in the comments. 👇

Does your skin still look dull, even when your routine seems “right”? 🤔 Sometimes the issue is how you exfoliate, not ho...
08/31/2026

Does your skin still look dull, even when your routine seems “right”? 🤔 Sometimes the issue is how you exfoliate, not how often.

Stronger is not always better. Harsh scrubs can leave skin feeling tight, irritated, and a little worn out.

Goat milk is a gentler option because it contains lactic acid, which helps lift away dead skin cells without that rough, stripped feeling. Your skin can look smoother, feel softer, and take in lotion or body butter a little better afterward.

This matters even more for dry or sensitive skin. When exfoliation is too aggressive, your skin barrier can get cranky fast. A simple routine, cleanse gently, then follow with lotion, usually works better than chasing quick fixes. 💛

What does your skin prefer, gentle exfoliation or gritty scrubs? Tell me in the comments. 👇

Goats can jump more than 5 feet high 🤯🐐 Could your pet do that?It sounds wild, but goats are built for it. They have pow...
08/28/2026

Goats can jump more than 5 feet high 🤯🐐 Could your pet do that?

It sounds wild, but goats are built for it. They have powerful legs, great balance, and the kind of coordination that makes climbing rocks, stumps, and fences look easy.

That jump is not just funny to watch. It helps goats reach food and stay safe in rough terrain. They are way more athletic than most people give them credit for.

I think that is a good reminder that animals can surprise us. Cats get praise for agility, dogs get praise for speed, but goats absolutely belong in that conversation too.

💬 So tell me, what kind of pet do you have, and are they an athlete or a professional napper? Tag an animal lover who’d enjoy this fact.

Ever had a print look perfect, then suddenly shift sideways? 😩🖨️ That’s a layer shift, and it usually means your printer...
08/26/2026

Ever had a print look perfect, then suddenly shift sideways? 😩🖨️ That’s a layer shift, and it usually means your printer tried to move, but something got in the way.

Most of the time, it’s mechanical. Loose belts, slipping pulleys, dirty rods, or worn wheels can make an axis miss its spot. If you hear a harsh grinding noise, pay attention, that’s a big clue.

Speed can trip you up too. If print speed or acceleration is too aggressive, your printer can skip steps during fast moves. Sometimes a tiny speed boost is all it takes.

And don’t ignore the print itself. Warped corners, curled edges, or stray filament can cause a nozzle collision and throw everything off track.

Start simple: check belts, pulleys, rails, speed settings, and heat around motors and drivers. 💡 What print issue gives you the most trouble lately?

Address

2301 Dave Lyle Boulevard Suite 123
Rock Hill, SC
29730

Opening Hours

Tuesday 11am - 7pm
Thursday 11am - 7pm
Friday 11am - 8pm
Saturday 11am - 8pm
Sunday 12pm - 6pm

Telephone

+18036277298

Website

Alerts

Be the first to know and let us send you an email when The GOAT by MLB posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The GOAT by MLB:

Shortcuts

Share

Category