LTKustoms

10/03/2026

Oh ya! Keeping your drink cold now too!!

09/14/2026

Take a look at all these great pictures from Apex Scale Challenge!

09/14/2026

09/14/2026

09/11/2026

Mr. NOWINCH! Yep, let’s take a look at Karl Klein and his c2 rig he’s been running for a few years now. He is on the first chassis I ever made and still competing no problem. This truck simply seems to work. This truck is what inspired the Zeus chassis and how my most common setup I recommend is built. He doesn’t use a winch… he has one but never uses it. He takes a different approach on everything to make sure he can finish without having to pull cable. While doing that he was also able to drive a few lines no one else could at Apex Scale Challenge I’ve the weekend in Oklahoma. Being a winch guy is very easy for him since you just point at the next gate and watch him drive lol. He is also the best winch guy in the country so thank you for being my winch guy dad!!

Take a look at the truck here and if you have any questions feel free to ask away!

Raijin chassis
Titanium links
Exo esc
4.75 super swamper
Canyon 8 wheels flat front and middle offset rear
Anti foams
Dlux dx44 front
H10 rear
Exo Alpinist trans
Exo driveshafts
Delrin LTK skid
450mah LTK battery
Yellow jacket motor
3brc G13 pro and atlas pro

09/10/2026

Next up let’s take a look at Zachary Jensen and his C2 running the Zeus chassis. Zach has been running this chassis for a good bit now and he also decided to run this chassis on his c1 and c3. Over the weekend he attended Apex Scale Challenge in Oklahoma. For the way Zach absolute dominated the competition you wouldn’t think it was a hard event… but I can definitely speak for everyone who attended and say that this event was extremely hard for the drivers and the rigs, because of the extreme weather and courses difficulty. Zach was able to take home 2 course awards and 1st overall for the event. He went into the finals ahead by like -60 plus points ahead of myself in second. After the 2 finals courses he stayed out front by quite a bit still. Very nice job Zach and top notch rig!
Take a look at Zach and his rig from this weekend here. If you have any questions please don’t hesitate to reach out to myself or Zach!

Chassis- LTKustoms Zeus
Links-LTK Titanium links
Motor-3bros Yellowjacket
Servo-3bros G13 LP
ESC- Rhino 80a
Winch- Reefs 300is
Trans- Dlux portal
Shocks- Traxxas 2660
Axles- Axial based aluminum portals.
Wheels- 2.2 CBE weighted
Foams- Ottsix halo mesh
Tires- Jconcepts Tusk

09/09/2026

Take a look at Team Driver Luke Norman and his C2 Zeus chassis build he has been running throughout the 2026 season. This past weekend he attended Apex Scale Challenge. It was his first time at this event and it was also mine. I can say that this event gave no mercy on absolutely anything. Being over 100 degrees this weekend you and your rig had to work extremely hard to simply finish the courses. Despite all of the challenges this weekend brought, Luke was able to bring home 7th overall! The scores were extremely tight in the top 10 we all had our fingers crossed!

Below you will find the baseline of what Luke runs inside his rig along with pictures of the rig and himself out on the rocks this past weekend. If you have any questions please reach out and I’m sure Luke or myself would be happy to answer any of your questions!

LT Kustoms
Gold Zeus Carbon rails
Chassis mounts and braces
Delrin Skid
Sliders
Titanium Links 13"wb
4s 300mah battery
Scale items (class requirement)

Dlux Fab
OD-4 Transmission
F10 Portal Heavy Brass covers
Shocks
Driveshafts
Team Spec motor and ESC
Iron Rock Tires

BAMF inserts

Shift wheels

Hibby rotors

3Bros 800lp steering servo

Reefs 444 winch

Vanquish
Carbon Spec F10 Protals

Axial Pro Body
Custom painted by Nomad Creations

Custom roll bar by CGRCFAB

09/06/2026

Well… that was fun! TWO LTK Zeus chassis made it to the finals and were able to get 1st and 3rd overall. I’ve wanted to attend an event with finals for a long time. This weekend I finally had the chance to do so and I was fortunate enough to not only make the finals but make double finals ending with a 3rd place overall and one best course award. Not driving this truck competitively since the winter or really driving at all since then made warming up slow. First 2 days were rough. First time ever getting a DNF in Oklahoma. I am happy to say it was all silly mistakes. No real failures, just need to keep an eye out for boundaries for the most part lol. Overall great weekend. Scores I’m sure will be available soon but I was able to finish both finals course while just making silly mistakes on the last course. Very pleased with the truck! I’m happy to say that 1st and 3rd place at Apex Scale Challenge were using my LTKustoms Zeus chassis too so I’m very happy with that. Congratulations Zachary Jensen on taking 1st. You drove very consistently and deserved it! Thank you for reading, congratulations to everyone and thank you for a fun event!

06/03/2026

That’s right!! LTKustoms is coming in strong at as many competitions as possible!

With just about 3 months until comp time we would like to introduce and welcome our title sponsor for this years event. LTKustoms is really stepping up with some very competitive chassis and parts. Go give him a follow and check out what he has to offer.

05/27/2026

If your in search of a new chassis or want to start a new build. Don’t think twice about the LTKustoms Zeus chassis. This chassis is designed to work well with any set of axles and allows you to have outstanding clearance while containing maximum stability that many high clearance chassis lack. This chassis placed first at Crawlapolooza last year Unlimited class, won the winter comp series at Crawler Canyon RC Park, and has been gathering more at many local comps!