31 Services

31 Services Mechanical Repairs, Machining, Prototyping, Welding, Production, Laser Cutting/Engraving 3D Printing. I am a mechanical designer and machinist by trade.

I enjoy everything from prototyping and small runs to restoring equipment and antiques. I have a well equipped shop and can do more for less due to little overhead. If you have something that needs done let me know, I'll be honest and upfront with you.

Next batch waiting for repairs. The YZ426F is as far as it can go until the oil pump comes in.
08/12/2026

Next batch waiting for repairs.

The YZ426F is as far as it can go until the oil pump comes in.

Cleaning and prepping for new parts..Putting parts back together..Diagnosing and ordering parts...Sums up today pretty m...
08/11/2026

Cleaning and prepping for new parts..
Putting parts back together..
Diagnosing and ordering parts...
Sums up today pretty much lol

Working on the Kohler again and determined the pushrods were bent due to bad gas seizing both intake valves in the guide...
08/09/2026

Working on the Kohler again and determined the pushrods were bent due to bad gas seizing both intake valves in the guides. They had to be persuaded out. heads are off and parts are ordered to get this one going again.

This ol Bad Boy mower has a Kohler engine doing Kohler things. Both intake pushrods bent . Will be getting a full servic...
08/08/2026

This ol Bad Boy mower has a Kohler engine doing Kohler things. Both intake pushrods bent . Will be getting a full service including Hydros once done.

Had a Kawasaki LX ski in for a impeller replacement. Upgraded to the Solas.
08/08/2026

Had a Kawasaki LX ski in for a impeller replacement. Upgraded to the Solas.

Had a beetle in for a suspected fan control module. Upon testing, a broken wire was found. Test, don't guess and follow ...
08/07/2026

Had a beetle in for a suspected fan control module. Upon testing, a broken wire was found. Test, don't guess and follow the data.

Lots of progress on the YZ426F engine rebuild. This is almost as far as I can take it until the oil pump comes in.Didn'...
08/04/2026

Lots of progress on the YZ426F engine rebuild. This is almost as far as I can take it until the oil pump comes in.

Didn't get pics of the other stuff worked on today.

Some more pelican cases finished up today. Also started assembly on the YZ426F. Still waiting on the oil pump but I am ...
08/03/2026

Some more pelican cases finished up today.

Also started assembly on the YZ426F. Still waiting on the oil pump but I am going to get it as far as I can in the meantime. All new bearings installed in freshly cleaned and repaired cases. Transmission is installed and the crankshaft is chilling till tomorrow morning for installation.

Another busy day today. Getting parts inspected and cleaned for the YZ426F. Had to repair 6 threaded holes as someone ...
07/31/2026

Another busy day today.

Getting parts inspected and cleaned for the YZ426F. Had to repair 6 threaded holes as someone stripped them out. Still waiting on a few parts to be delivered.

Also had a bunch of equipment dropped off today for various repairs and service.

Laser was busy today. Turned a stack of foam into useful parts. Lots of contact spray later I have a stack of inserts f...
07/24/2026

Laser was busy today. Turned a stack of foam into useful parts. Lots of contact spray later I have a stack of inserts for pelican cases ready to install.

Address

Ruffs Dale, PA
15679

Website

Alerts

Be the first to know and let us send you an email when 31 Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 31 Services:

Shortcuts

Share