Dave's RC Electronics

07/16/2026

One of our customers is sending us his plane for a custom set of Dave's RC Electronics NavLights! (I'm gonna need to order more wire...)

11/29/2025

l like sharing pictures sent to us by happy customers, these were submitted by Tim F., who lives way up in Maine! Tim did a great job of installing a set of our Basic NavLights-8mm in a plane that looks a lot like a typical high-wing trainer, I think I can see the bands that hold the wing on crossing over the top of the wing. This kit is available with either a red strobe (like Tim's) or a white strobe, and the landing lights can be switched on/off from the transmitter. These pictures just go to show that you don't have to have a big, expensive model to benefit from installing a set of navigation lights. Navigation lights not only add a measure of "bling" to your model, they also increase visibility in all conditions, but especially on cloudy days or at dusk. Thanks Tim!

03/09/2025

Today I have a couple of YouTube video to share from Ryan A. from Arlington, Texas. Ryan asked me to build him a set of "custom" navigation lights for his electric Turbo Bushmaster that had the standard compliment of wingtip, strobes, and landing lights that most Bushmasters have, but he also wanted to be able to switch the landing lights from a "solid on" to a "wig-wag" pattern. We were able to do this with some of our legendary programming magic, (🙄) and these videos show the result of his excellent installation of the set. The first video is a walkaround of the model on the ground, and the second was a flight made at dusk-thirty. Thanks for sharing, Ryan!

Ground Video - https://youtu.be/XhFfpD8CT4I

The Flight - https://youtu.be/DK7__m-Wix8

A recent flight just after dusk with the new navigation lights. I performed a series of landing patterns with the landing lights tested in both modes availab...

02/04/2025

One last video to share, this is from Jeff N., and it's a series of pictures, and one video, of his installation of a set of our Deluxe Afterburner Kit in his ducted fan jet. I'm not sure brand or model this is, but it's an ARF, and Jeff included a few pictures showing how he installed the LED Strip Lights and routed the wires inside the fuse. The video shows the completed afterburner, this is the version that lights the afterburner when the throttle stick is all the way high (WOT). Jeff has actually installed a couple of these kits in his jets, thanks for sharing these with us Jeff!

https://www.davesrce.com/product-page/led-afterburner-ring

02/04/2025

Here are a couple of pictures of Jon's 450-size Flywing Bell 206. Jon M. used a set of our All-in-1 NavLights with 3mm LEDs, and installed them beautifully on this model. Many helicopter models have small areas that make installing some lights difficult, but our 3mm LEDs can be mounted on or in most any surface and still provide good illumination and scale looks. Nice job, Jon!

https://www.davesrce.com/product-page/all-in-one-navlights

02/04/2025

This next video is not something you're gonna see very day, this was sent to us by John S. in Michigan of his Iron Man drone. Yep, you read that right, he built a flying Iron Man, complete with lights on the hands, feet, and chest. John used our Afterburner LEDs to make the lights on his hands and feet "flicker" like the real thing. (OK, wait, I know Iron Man wasn't "real", but ... you know what I mean!) We also provided some 3-watt COB LEDs for the chest and the hands, and John used LED Strip Lights for the feet. For anyone else who has a project that could use the Afterburner effect, we have a version of it that is "on" all the time, that's what John used for his build. This is slick, totally slick!

https://www.davesrce.com/product-page/led-afterburner-ring

This is my RC Ironman I purchased through AliExpress! I put together a build thread on Flying Giants as the YouTube build video is in Chinese! Can't wait f...

02/04/2025

It's been a while since I've added any new customer videos, (things have been really busy around the shop!), so I thought I should post some of the best ones I've received over the last several months.

First up is a set of 8mm Navigation lights that Darren R. installed on his electric DeHavilland Beaver. I'm not sure about the wingspan or the brand on this model, maybe Darren can fill us in on that, but they look really nice. This set includes wingtip navigation lights, wingtip strobes, a (red) strobe for the fuse, and features our wig-wag pattern on the landing lights. The wig-wag pattern is common on many bush or float planes, because it doesn't compromise the pilot's peripheral vison when landing, and is highly visible from the ground. Notice that the landing lights don't just "strobe" or flash, but they fade in and out together in a unique pattern. Check out all the planes on the walls, on the desk, everywhere in the background. Darren loves planes like I love planes!

https://www.davesrce.com/product-page/navlights-for-dehavilland-beaver

06/06/2024

Cross posting this from my business fb page, 'cause I figure we all could use a good laugh about now...

Well, life goes on. This is my first post on my business's fb page since my beloved wife went to Heaven, and maybe it's fitting. She would have laughed so hard at this!

Recently a customer, Joe F., asked me to build him a set of lights. Nothing unusual about that, right? Except this was for a rocket he was building. He had some very specific (and unusual) specs for this build, and I was glad to tackle the project. He just sent me a video of the finished masterpiece, it's a Minion Rocket. Be sure to turn your volume up, he has added audio that will crack you up. Well done, Joe, well done!

https://youtu.be/K2t4exYXUIo?si=7hCyWTz-a9OrtFmt

06/06/2024

Well, life goes on. This is my first post on my business's fb page since my beloved wife went to Heaven, and maybe it's fitting. She would have laughed so hard at this!

Recently a customer, Joe F., asked me to build him a set of lights. Nothing unusual about that, right? Except this was for a rocket he was building. He had some very specific (and unusual) specs for this build, and I was glad to tackle the project. He just sent me a video of the finished masterpiece, it's a Minion Rocket. Be sure to turn your volume up, he has added audio that will crack you up. Well done, Joe, well done!

https://youtu.be/K2t4exYXUIo?si=7hCyWTz-a9OrtFmt