DMV Appliance

  • Home
  • DMV Appliance
Directions Website

DMV Appliance Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from DMV Appliance, Appliances, .

DMV Appliances Repair has been providing the services of Home Appliances in Metro DC and surrounding Areas for many years with a combination of Outstanding Performance of Factory Trained Technicians and friendly Customer Service Staff.

18/10/2014
A dryer is a common home appliance which is available in every home. It is simply a large drum into which wet laundry is...
21/05/2014

A dryer is a common home appliance which is available in every home. It is simply a large drum into which wet laundry is loaded to dry. A motor with pulleys -- connected by a series of belts -- turns the drum. Air heated by a gas heater or electric heating element is blown through the drum to dry the laundry. The temperature and speed of the drum are controlled by a series of thermostats operated from a timer device on the control panel of the dryer.
As a safety device, a dryer usually has a door switch that activates the working parts. Unless the door is properly closed, the dryer won't work, regardless of the settings on the control panel. Many dryers are equipped with a reset button on the control panel. There are some common problems found in working of dryer. By studying it you will be able to handle some common problems by yourself. For example If the motor won't run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer. Caution: Before doing any work on the dryer, make sure it's unplugged. Disconnect the grounding wire. If it is a gas-fueled dryer, close the gas-supply valve to shut off the unit's gas supply. Repairing of electronic items at home by untrained electrician may result a big fault instead of its rectification. So always call a factory trained technician for repairing of your home appliances.

DMV appliance has factory trained technicians to repair appliances at doorstep. So call us at any time 24/7 and keep noted that we don't charges service call. To contact us you may dial 301-850 4455 / 703-745 5526.

http://www.dmvappliance.com/freezer-cooling/
30/03/2014

http://www.dmvappliance.com/freezer-cooling/

The most common problems found which contribute to the symptom Freezer not cooling. List of these conditions are listed below. If you are still unable to solve the problem you may need to do additional research and troubleshooting. We are always standing with you to solve the problems in appliances…

A refrigerator/freezer is one of the few appliances in your home that runs continuously, day or night, keeping your food...
30/03/2014

A refrigerator/freezer is one of the few appliances in your home that runs continuously, day or night, keeping your food cold. On the rare occasion your refrigerator does stop working, you may face a high repair bill and the expense of replacing all your lost food. Have no fear! This article is here to tell you everything you need to know about repairing your refrigerator and freezer yourself. You might be surprised to learn that repairs are actually quite easy, requiring only a little knowledge about the appliance and a little patience. Let's get started with some basic information. If you feel problem in any case, pls do not take risk to get repaired you appliance by untrained technicians. Untrained technician may solve the current problem but will create so many ohter problems. We suggest to call only factory trained technicians for repairing of home appliances. We have a team of factory trained technicians and we are just a call away from your door-step. You may contact us 24/7 at 301-850 4455 (MD), 703-745 5526 (vA) and we'll send factory trained technician to repair the faulty appliance till your 100% satisfaction.

Be Awared: Before doing any work on a refrigerator or freezer, make sure it's unplugged. After unplugging the unit, check to see if the motor/compressor has a capacitor; this component is located in a housing on the top of the motor. Capacitors store electricity, even when the power to the unit is turned off. Before you do any work on a capacitor-type refrigerator or freezer, you must discharge the capacitor, or you could receive a severe shock.

Common Problems in Freezer:

Freezer not cooling
Freezer not working, clicking sound
Freezer runs all the time
Freezer leaking water
Freezer defrost drain problems
Freezer coils frosting up
Freezer indicator light is out
Freezer only freezes top shelf

Water Heater Problems:We have factory trained technicians to repair all major brands of home appliances. Our technicians...
22/02/2014

Water Heater Problems:
We have factory trained technicians to repair all major brands of home appliances. Our technicians always try to educate some easy tips about how to solve common problems. Below you will find about how to solve common problems in water heater. When our water heater is working properly, we use hot water for everything from showers to laundry, without a thought. But when it stops working, we have to detect the source of the problem and repair it. How do we diagnose a water heater problem?

If there's simply no hot water it could mean the pilot light's gone out. Check the pilot light. If it's out, you can relight it, by following the directions in your owner's manual. If you can't do this yourself, a gas company technician can do it for you.

If you hear strange noises coming from the hot water heater you're probably hearing minerals or hard-water scale that's accumulated inside the tank and broken off. In this case you'll have to drain the tank and clean out the sediment. You may call us to send technician for this task.

If you find water on the floor near the water heater, it means that water is seeping from the tank. The water could be coming from a loose valve or from a leaky pipe. If you don't see any leaky pipes, you can try tightening the valve. If this valve is loose, water might leak out of the heater. Otherwise, the leak might be caused by a faulty valve, an obstructed vent or a defective heating element.

If the water isn't hot enough, the first thing to do is check the thermostat. If the thermostat is set correctly, try to remember when you last flushed out the tank. Mineral build up inside the tank can keep the water from heating up properly. If your tank doesn't need flushing, you might want to check the heater's dip tube. If the dip tube is broken, the water won't heat up properly. You can check the dip tube by removing the cold water supply line and taking the dip tube out of the tank.

Modern Freezers:You know that vapour compression is the principle behind the freezer. But how exactly does it work? At t...
15/02/2014

Modern Freezers:
You know that vapour compression is the principle behind the freezer. But how exactly does it work? At the core is a fast-moving stream of vaporized refrigerant that goes through a cycle inside the freezer.
To get an idea of how it works, picture a river as it winds through the mountains and countryside and route to the ocean. Once it empties out, then it's taken up by clouds, turned into rain, and re-enters that river where it flows to the ocean again. Refrigerant flows and transforms from liquid to gas and back in a similar way.
Today, some of the most commonly used refrigerants are HFCs (hydro-fluoro-carbons). Other refrigerants, such as CFCs (chloro-fluoro-carbons) and HCFCs (hydro-chloro-fluoro-carbons) are highly regulated -- and banned from use in many products -- in the United States since they were contribute to depleting the atmospheric ozone layer [source: EPA].
The refrigerant begins the cooling process as a vapour under low pressure. The first freezer component it enters is the compressor (usually found in the lower back of the freezer). The compressor squeezes the vapour's particles, which heats it up and converts it into a high-pressure state.
The hot, pressurized refrigerant is pumped by the compressor through a tube into the next component called a condenser. If you've ever touched the outside of your freezer and felt warmth, that's the heat coming off the condenser coils, which usually sit underneath or at the bottom of the freezer, where they can be exposed to room temperature air and cooled down. As the vapour travels through the condenser coils, it loses the heat but retains its high pressure. It is also converted into a moderately warm temperature.
The now-liquid refrigerant's inherent pressure pushes it through into the next component: the metering tube. This small structure regulates the vapour's pressure so it can head into the next component.
As the liquid refrigerant heads from the small metering tube into the larger evaporator, its pressure drops suddenly, causing it to convert back into a low-pressure vapour. The evaporator also absorbs the heat, which leads to a freezing cold vapour that keeps the unit's temperature cold enough for freezing your food. The vapour then goes back to the compressor to begin the process anew.
Vapour compression isn't the only way to create a super-cold food storage environment. We (DMV Appliance) has factory trained technicians to repair all major brands of Freezers & other Home Appliances. Just Call us at below numbers to get repaired your appliances at your door step.
(MD).......301 - 850 4455
(VA).......703 - 745 5526
We don't charge service call and offers different discount packages for senior citizens and military & Govt. officials.

How to Repair an Oven:Gas and electric ranges and ovens operate fairly simply, and they're usually easy to repair, mainl...
31/01/2014

How to Repair an Oven:
Gas and electric ranges and ovens operate fairly simply, and they're usually easy to repair, mainly because the components are designed for quick disassembly.
Most of the malfunctions that affect gas ranges involve the supply and ignition of gas in the burners and the oven. Most malfunctions that affect electric ranges and ovens involve faulty heating elements. In this article, we'll discuss how the main parts should work on gas and electric ranges and ovens and how to service them regularly to avoid larger, more expensive problems. The first step is taking a peek inside to assess the problem.Caution: Before doing any work on a gas range or oven, make sure it's unplugged, or turn off the electric power to the unit by removing a fuse or tripping a circuit breaker at the main entrance panel or at a separate panel. If there is a grounding wire to the range, disconnect it. Also close the gas supply valve to shut off the unit's gas supply.

How to Repair a Washing Machine:It's laundry day. You know this because the shirt you're wearing is eight years old and ...
31/01/2014

How to Repair a Washing Machine:
It's laundry day. You know this because the shirt you're wearing is eight years old and doesn't match your pants in any light. And there's a chance, just a chance, that you're wearing one black sock and one Navy blue sock. So you schlep a heaping hamper to the laundry room and carefully (or not so carefully) separate colours from whites. Then, you cram as many as will fit into the washer, throw in some detergent and hit the START button.
And nothing happens.
Suddenly, the piece of machinery you could always count on is on the Fritz. Washing machines are the workhorses of the household appliance stable -- in fact, there's even a TED Talk about how they're the most important invention of the Industrial Revolution. And when they go down, they're the toughest to get by without. Who wants to drag their laundry down the street to the laundromat and fight other people for the privilege of shoving quarters into a strange machine that you suspect may not take the gentle cycle very seriously?
So, you have a choice to make: Call a repairman or see if you can tackle the problem yourself. Because washing machines do so many things, they may be harder to diagnose than they are to repair. For a household appliance, it's a pretty complicated gizmo's - with special timing cycles that operate valves, motors that turn water on, spin the tub, drain water, and control the water temperature.
Note: Many newer washers include electronic diagnostics that can be interpreted from the owner's manual.
Caution: Before you do any work on a washer, make sure it's unplugged. Disconnect the grounding wire and the water hoses.
But diagnosis is possible, even for the do-it-yourself. It just takes a little patience and a basic understanding of washing machine mechanics. In this article, we will explain how to troubleshoot your washing machine and describe some quick repairs for common malfunctions.

How to Repair a Dishwasher:The control panels on the latest dishwashers can look intimidating. They're loaded with so ma...
31/01/2014

How to Repair a Dishwasher:
The control panels on the latest dishwashers can look intimidating. They're loaded with so many dials, push buttons, and other features that the machine looks too complex to repair. This is actually not the case. With the exception of the control panel, dishwashers haven't changed much in basic design over the last two decades. You can repair most dishwasher malfunctions yourself, and we'll discuss tips for do-it-yourself service and maintenance in this article.
Dishwasher parts can be replaced as a unit, which is often easier and less expensive than having a professional service person make repairs. If you aren't sure a part is still usable, remove it from the dishwasher and take it to a professional for testing. You can then decide whether to buy a new part or have the old one repaired on the basis of the repair estimate.
Dishwashers usually run on 115-volt or 120-volt power. The water they use comes directly from the water heater, and waste water is drained into the sink's drainpipe. The dishwasher is not connected to the cold-water supply. For best dish washing results, set the temperature control of the water heater to no less than 140 degrees Fahrenheit. Water cooler than this usually doesn't get the dishes clean, unless your dishwasher is a newer model that preheats incoming water. The water shut-off for the dishwasher is typically located below the adjoining sink.
Caution: Because the dishwasher is connected to both the plumbing system and the electrical system, you must consider both systems when working on this appliance. Before doing any work on the dishwasher, make sure the unit is unplugged or the power to the unit is turned off, and remove the fuse or trip the circuit breaker that controls the circuit at the main entrance panel or at a separate panel. Shut off the water supply to the dishwasher at the shut-off in the basement or crawl space under the kitchen.

Address


Alerts

Be the first to know and let us send you an email when DMV Appliance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Want your business to be the top-listed shop?

Share