Agne Arms

06/14/2026

Well the tuner (shown mounted 1st picture) definitely works. I'll have a video coming to explain how/why it works. But took it out and found the settings for scope and irons (video will explain why these are different). Winds were 10-20 SSW-SW so that was causing some of the vertical. Just shooting for group not scoring rings at 50yd so wind didn't play to much of an issue. 2nd picture is when it's in the node for scope. Fired a 6th because I had 1 round left in the box. Not a bad little knot. 3rd picture is same sight setting but the tuner is dialed where I'm out of the node. 4th picture is the setting for irons, yanked the low right shot. 5th picture is same setup but with the tuner set out of the node. Found out I have a 0.005" window with scope, 0.003" window with irons, I'll explain this in the video too, :) All shot with Wolf Match Target.

06/13/2026

Finished up engraving and putting the holes in the tuner. Came out pretty nice. Only problem i engraved the numbers wrong way but not redoing those. Will use the brass set screw to lock the outer ring. Attaches to the bloop tube via the counterbore holes.

06/12/2026

Tuner done for the kimber 82g. Now just have to do mounting.

06/06/2026

Lets make a tuner for the smallbore gun.

06/04/2026

Just finished customers 82g chasis. Action is pillar bedded to the chasis providing an unbelievably solid setup and zero stress. Action can be removed but it is snug. Trigger guard is slotted for the original trigger. Colors are Illisnois navy and orange splatter pattern. Handguards are per customer request. He wanted slots on shape of a 22LR round since its a smallbore rifle so thay is what we did. Buttstock is marked every 1/4" for length of pull and for height adjustment. Rod lengths and markings available at customer request. Chasis is 6061 along with rails, k***s and buttstock. Buttstock pull rod, vertical rod, and the cheek raise rods are 304 stainless and all screws are 316 stainless. The stainless is standard on all chasis. Handstop is an EGW handstop and the grip is a Sierra Presicion. This is not a light chasis but incredibly stable and with early testing it squeezes every but of accuracy out of an 82g. You won't. E disapointed

Pictures with Agne Arms model showing relative size (ok Anna just wanted to model) and its Big Brother Rifle because well UofM owns U of I :)

06/01/2026

https://youtu.be/oniMAMULAts

Review of the T3xCTR and Loader Monkey ammo

04/21/2026

Well finally got around to drawing them up. Shall we call it the Leftsight?
Or maybe The Wrongsight? :) lol

Will have the shades also.

My kids will not be wanting that is for sure.

04/04/2026

Embrace the ooze!
Glass bedding a smallbore Fclass rifle for a customer.
Much easier than doing a M1A/M1 build
What can Agne Arms do for you.

03/22/2026

I'll do a video to explain and show off the Kimber82G chasis stockb later. But have mine (1 of the 4 ordered) together and have the scope and irons zeroed in.

Had reached the limit with the original stock that I did a lot of work to to make it more comfortable but still wasn't as comfortable as the other probe rifles. Plus the Unertl 20x was a little dark and wanted more light than the 20mm front.

Now the optics of the Here's UHD and a 30mm front are night and day different. The round handguard just feels great in thr hand vs. The original stock.

The XTSP 82G trigger is a must for anyone really wanting to be serious with the rifle.

Per the advice of Jeff Perry they are bedded into the chasis.

If you have an 82G and want to take it to thr next level performance wise. What can Agne Arms do for you.

03/02/2026

Felt bad for my customer who is an Illisnois fan after UofM smacked them around Friday. So I powder coated his chasis. Colors are Illisini Blue and Orange with a splatter pattern to help blend them. I don't have the rails made yet so haven't done the cheek raise. This and mine are nearing completion.