Foxfire Guns & Gunsmith

09/25/2026

🔥 FOXFIRE IS SET UP AT THE PARKERSBURG ARMORY GUN SHOW! 🔥

We’re here with J. S. Grimm Armament, and WE’RE TAKING IN GUNS!

🔧 GOT A BROKEN, MALFUNCTIONING, OR NEGLECTED FI***RM SITTING IN YOUR SAFE? BRING IT TO THE SHOW.

DON’T TAKE IT BACK HOME, BRING IT TO FOXFIRE.

We’ll get your fi***rm checked in, tagged, documented, and officially started into our repair or restoration process. Whether it needs a simple repair, a deep cleaning, troubleshooting, or a full restoration, this is your opportunity to get it moving.

🤔YOUR “I’LL GET THAT FIXED SOMEDAY” GUN?
TODAY IS SOMEDAY. BRING IT IN.

🎯 GET READY FOR HUNTING SEASON!

We’re also handling these ON-SITE:
• 🔍 Pre-season fi***rm inspections
• 🎯 Bore sighting
• 🧼 Cleanings
• 🔧 Diagnostics & repairs
• 🛠️ Gun intake for restoration work

• 🔧Torque checks (stock bolts, scope bases, scope rings)

If you’ve been putting off getting a fi***rm checked, cleaned, repaired, or restored — bring it with you to the show.

🔥 AND THIS IS AN “EVERYTHING MUST GO” SHOW! 🔥

Everything we have priced is NEGOTIABLE. See something you want? MAKE AN OFFER.

📍 Parkersburg Armory Gun Show
🤝 FoxFire + J. S. Grimm Armament

BRING THE GUN YOU’VE BEEN MEANING TO GET FIXED.
BRING IT TO FOXFIRE and J. S. Grimm Armament

🦊 FoxFire Community — Built to Make It Right.

09/21/2026

🔥 FOXFIRE COMMUNITY — WE’RE HEADING TO THE PARKERSBURG GUN SHOW! 🔥

We’ll be set up at the Parkersburg Gun Show this weekend at the National Guard Armory — 1500 Blizzard Drive, Parkersburg, WV!

📅 Saturday, September 26: 9 AM – 5 PM
📅 Sunday, September 27: 9 AM – 3 PM

And as always, you don’t have to just come by and say hello — bring those problem guns with you! 🔧🦊

Got a fi***rm that’s:
• Not running right?
• In need of a repair or parts replacement?
• Due for a cleaning or diagnostic?
• Ready for an optic cut, barrel threading, or other machine work?
• Been sitting in the safe because you just haven’t gotten around to getting it fixed?

BRING IT WITH YOU AND DROP IT OFF WITH FOXFIRE!

We’ll have our usual Gun Show Intake available, so you can drop your fi***rm off with us at the show and get it into the shop for evaluation and repair.

We’ll also have FoxFire information available and would love to talk with you about your next project, custom build, restoration, or gunsmithing needs.

🦊 FoxFire — Precision Gunsmithing. Built Right.

📍 National Guard Armory
1500 Blizzard Drive
Parkersburg, WV

Come see us, bring your questions, and if you’ve got a gun that needs attention — bring that too! 🦊🔥

09/11/2026

🚨 FOXfire COMMUNITY — WE’RE HEADED TO ELLENBORO! 🚨

We’ll be set up at the Ellenboro Gun Show TODAY & TOMORROW! 🔥🦊

📅 TODAY — 09/11: Noon–6 PM
📅 TOMORROW — 09/12: 9 AM–5 PM

And this one is a little different…

🔥 EVERYTHING MUST GO SHOW! 🔥

ALL of our inventory is negotiable. If you’ve had your eye on something, come see us and MAKE US AN OFFER! You might be surprised what we’ll do. 👀

🔧 Our usual Gunshow Intake is OPEN!

Yep — bring those broken guns to us! If it needs:

• Gunsmithing
• Repair
• Inspection/diagnostics
• Machine work
• Barrel threading
• Refinishing
• Cerakote
• Or just some attention from a gunsmith…

Bring it with you!

💰 GOT GUNS SITTING AROUND THAT YOU WANT TO SELL?

Bring them by and talk to us about CONSIGNMENT. Let FoxFire put our experience and customer base to work selling them for you. (Consignment terms/details apply.)

🤫 WANT TO QUIET DOWN YOUR PEW PEW?

We’ll also have our inventory of suppressors with us at the show!

We have the necessary systems in place to handle the required background checks and paperwork right there, making it easy to get the process started on your next suppressor.

Come check out what we have available and let’s get your whisper pickle plans rolling. 🤫🦊

Whether you’re coming to buy, sell, fix, inspect, consign, quiet down your pew pew, or just want to stop by and say HI — come see us!

We’re looking forward to seeing the FoxFire Community, catching up with familiar faces, and meeting plenty of new friends.

🦊🔥 Ellenboro Gun Show — TODAY & TOMORROW.

Come see us. Bring your guns. Make us an offer. Let’s make a deal!

09/06/2026

08/15/2026

Did you know we offer custom muzzle breaks to tame your bruiser down? Well ya do now! Call or message us today to discuss your options! 🦊🔥

06/24/2026

🤫Another orphan up for adoption! This thing is sweet! Original box, paper it came wrapped in, cylinder bag. MINT. Message us for more details and add this to your family🦊🔥

06/23/2026

🫣 Check out this little gem that we found in the wild! This one is up for adoption🤌🏻 UNFIRED! Message us for details🦊🔥

06/19/2026

🔧 Bringing an Old Warhorse Back to Life 🔧

Pictured here is a Yugo Ma**er that recently came through the FoxFire shop with a mission: transform a classic military r***e into a capable long-range shooter while keeping its historic character intact.

The customer supplied a set of scope mounts, rings, and a Zeiss optic, and let us tell you… these mounts were a chore to say the least! Unlike modern mounting systems, these required the receiver to be drilled and tapped at an angle, which meant HOURS of careful setup and precision measurement before a single chip was made.

Once we indicated our center from the receiver edge and precisely located both mounting positions, the drilling and tapping began. Every hole had to be straight, level, and perfectly positioned. No shortcuts. No guesswork.

With the mounts installed, the project still wasn’t finished. The forend had to be carefully modified to accommodate the new hardware and ensure everything fit together cleanly and correctly.

The result? A classic Yugo Ma**er that maintains its vintage look while gaining modern capability. This old warrior is ready to reach out and touch something once again.

Whether you’re looking to modernize a hunting r***e, mount optics to a classic fi***rm, restore a family heirloom, or tackle a custom project others won’t touch, FoxFire has the tools, experience, and attention to detail to get it done right.

📞 Have a project sitting in your safe?
📩 Send us a message today and let’s bring your fi***rm back to life!

**er **erBuild

06/18/2026

🦊🔥 FROM RUSTY RELIC TO FAMILY HEIRLOOM 🦊🔥

This Savage Model 24 (.223 over 20 Gauge) came to us after being won at auction for a customer. At first glance, it looked like it had seen better days…

❌ Rust-covered metal
❌ Dings and wear throughout the stock set
❌ Barrels that had separated and were no longer soldered together
❌ Unsafe to fire

Many would have written this old classic off as a wall hanger.

Not us.

With the help of JS Grimm Armament and our very own “Machine Shop Santa,” we set out to give this fi***rm a second chance. Since replacement parts simply don’t exist for projects like this, a custom barrel band was hand-made from scratch and precisely fit between the barrels before being soldered into place to restore structural integrity.

Then the real transformation began:

✅ Barrel assembly re-blued
✅ Magazine tube re-blued
✅ Hammer, trigger, and pigtail refinished
✅ Receiver Cerakoted in Graphite Black
✅ Stock dings carefully sanded and repaired
✅ Hand-rubbed oil finish applied to the entire stock set

The result? A fi***rm that not only looks beautiful again but is safe, functional, and ready for many more years in the field.

This old Savage has been preserved for another generation of hunters, storytellers, and family traditions. And with any luck, it’ll spend its future chasing squirrels, rabbits, and plenty of thunder chickens.

At FoxFire, we don’t just repair fi****ms—we preserve history, memories, and family heirlooms.

Got an old fi***rm tucked away in a closet, safe, or attic that deserves a second chance? Let us take a look. You might be surprised what’s possible.

📞 Message us today to discuss your restoration project.
📸 Be sure to check out the before-and-after photos below and tell us what you think of this transformation!