Shed Head Woodworking

Shed Head Woodworking Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Shed Head Woodworking, Shopping & retail, Warrenville, IL.

This custom laser-engraved hickory and walnut cutting board turned out pretty sweet. Message me if you need laser engrav...
05/21/2026

This custom laser-engraved hickory and walnut cutting board turned out pretty sweet. Message me if you need laser engraving that'll make your friends jealous.

✨️SOLDThis is a refinished Ed Roos cedar chest circa the 1940's. This chest saw better days. Someone before me tried to ...
05/16/2026

✨️SOLD
This is a refinished Ed Roos cedar chest circa the 1940's. This chest saw better days. Someone before me tried to refinish it unsuccessfully. There were orbital sanding marks all over the lid, including the waterfall front. The chest was a dull, unimaginative medium brown. All the inner tray hardware, the tray, and the hinges were missing. I stripped the entire finish off and made repairs to the walnut/mahogany/zebra wood veneers. The trim was painted with Behr premium satin enamel in Deep Espresso. The entirety of the chest was topcoated with Varathane Ultimate oil based polyurethane in a semi-gloss finish. I added corner supports to the base with new plastic feet. New hinges were installed inside the lid and cabinet.
$275 Cash, Zelle or credit card accepted.
No holds.
Pick up in Warrenville.
Local delivery is available for a fee.

✨️SOLDThis is a restored vintage 1945 Lane cedar chest. The old, crystallized laquer finish was completely stripped. The...
05/03/2026

✨️SOLD
This is a restored vintage 1945 Lane cedar chest. The old, crystallized laquer finish was completely stripped. The bookmatched veneers consist of walnut, banana wood, and mahogany. The chest was finished with 3 coats of Varathane oil-based satin polyurethane to bring out the warmth of the burled walnut on the center of the cabinet. The base and trim were painted with Behr premium satin Deep Espresso enamel before getting the same topcoat treatment. The base has new plastic feet to replace the rusted/missing steel feet. The lock has been disabled due to a national recall, but all parts and the original key are included. This is a beautiful, functional accent piece that can dress up any decor.

Measurements: 47" wide, 22" tall, and 18 1/2" deep.

$275. Cash, Zelle, credit card accepted.
No holds.
Pick up in Warrenville.
Local delivery is available for a fee.

✨️SOLDThis is a restored vintage 1943 Lane cedar chest. This chest had a large amount of damage and required a lot of at...
05/01/2026

✨️SOLD
This is a restored vintage 1943 Lane cedar chest. This chest had a large amount of damage and required a lot of attention. The old, crystallized laquer finish was completely stripped off as it was failing miserably. The bookmatched veneers consist of walnut, zebra wood, and mahogany, and it features an incredible maple burl in the center of the cabinet. The tray and hinges inside the lid needed to be rebuilt. The chest was finished with 3 coats of Varathane oil-based satin polyurethane to bring out the warmth of the walnut. The base and trim was painted with Behr premium satin Deep Espresso before getting the same topcoat treatment. The base has new plastic feet to replace the rusted/missing steel feet. The original advertisement from 1943 is still stapled to the inside of the lid. This is a beautiful, functional accent piece that can dress up any decor.

Measurements: 47" wide, 23 1/2" tall, and 18 1/2" deep.

$315. Cash, credit card and Zelle accepted.
No holds.
Pick up in Warrenville.
Local delivery is available for a fee.

✨️SOLDThis professionally refinished vintage Lane cedar chest is part of the Sweetheart series, manufactured in 1950. It...
04/21/2026

✨️SOLD
This professionally refinished vintage Lane cedar chest is part of the Sweetheart series, manufactured in 1950. Its' clean rectangular lines lend itself to popular MCM styling. The veneer is a combination of Claro walnut and Zebra wood, showing off super rich colors and interesting grain patterns. The base and feet were painted with Behr premium enamel in Baronial Brown and then topcoated with clear matte enamel. The original information brochure is tied to the interior felt-lined tray.

Measurements: 47" long, 20.5" tall, 18.5" deep.

$225. Cash, Zelle and credit card accepted.
Pick up in Warrenville.
Local delivery is available for an additional fee.

✨SOLD️Pine Faux Live-edge Accent TableThis is a truly unique, one-of-a-kind table featuring real river rock, captured in...
04/20/2026

✨SOLD
️Pine Faux Live-edge Accent Table

This is a truly unique, one-of-a-kind table featuring real river rock, captured in 2-part clear epoxy and metal hairpin legs (protective rubber feet not shown). This piece was stained with Minwax Jacobean stain and then sealed with 5 coats of de-waxed shellac. It is perfect as an accent, sofa, console or entryway table.

Measurements : 29.5" tall, 39.5" long, 14" deep, 1.5" thick

(Care should be taken not to expose the tabletop to solvents or alcohol)

$280 Cash, Zelle or credit card accepted.
Pick up in Warrenville.
Local delivery available for an additional fee.

✨️SOLDThis elegant vintage 9 drawer dresser has been professionally refinished in a warm neutral tone that complements a...
03/22/2026

✨️SOLD
This elegant vintage 9 drawer dresser has been professionally refinished in a warm neutral tone that complements any décor style. Picture #3 reflects true color.

- Body painted in Ceramic Beige (Behr Premium
Alkyd Enamel)
- Top refinished in Minwax Jacobean stain on white oak veneer
- Sealed with Varathane Ultimate Water-Based Satin Polyurethane for long-lasting protection
- Drawers lined with beautiful floral paper
- Upgraded hardware

Perfect for a bedroom, entryway, dining room buffet, or TV console.

Dimensions:
72" wide
20" deep
33" tall

Very heavy — will require TWO people for pickup

Pickup in Aurora 60503
Cash or Zelle only
$595

One of my clients had a large empty wall in their home and no idea what to put there. They wanted something that would f...
03/18/2026

One of my clients had a large empty wall in their home and no idea what to put there. They wanted something that would fill the space without overwhelming it — functional, beautiful, and custom to their home.

I built this solid fir console table specifically for that spot, and it turned out to be the perfect fit. The warm natural wood tones add instant character, while the clean, sturdy design keeps the space feeling open and inviting.

Now that blank wall has become a beautiful focal point — perfect for décor, lamps, baskets, and everyday use.

Handcrafted from solid fir and built to last.

Custom pieces available — message me if you have an empty space that needs something special! ✨

✨SOLDBeautiful Lane Furniture waterfall cedar chest from around 1945, professionally restored and ready for a new home. ...
03/01/2026

✨SOLD
Beautiful Lane Furniture waterfall cedar chest from around 1945, professionally restored and ready for a new home. This piece features stunning bookmatched walnut veneer with a rich natural finish that really highlights the wood grain.

The interior is aromatic cedar, perfect for storing blankets, quilts, or keepsakes. The exterior has been carefully refinished, and the trim and base were refinished in a deep espresso tone to complement the mahogany.

Details:
• Classic waterfall design from the 1940s
• Bookmatched walnut veneer with tung oil finish
• Cedar-lined interior for storage
• Updated child-safe Lane lock
• Structurally reinforced during restoration for long-term durability

This is a solid, heirloom-quality piece that combines vintage craftsmanship with a clean updated look.

$275

Venmo, Zelle, and credit card accepted. Pickup in Warrenville.

Do you have a deep, undermount sink? Send me your dimensions and I can make you a custom, laser engraved cutting board t...
02/23/2026

Do you have a deep, undermount sink? Send me your dimensions and I can make you a custom, laser engraved cutting board that fits neatly onto the top lip of the sink!

The cutting board pictured here is made from domestic hickory. The board is reversible, flat on one side and a juice groove on the other. The flat side is ideal for laser engraving. This particular board is approximately 1 3/4” thick and just proud of the countertop.

Price can vary based on dimensions but they start at $50 without laser engraving.

Just finished this custom laser engraved coaster order for a member of Punishers LEMC Illinois. Message me to discuss cu...
01/03/2026

Just finished this custom laser engraved coaster order for a member of Punishers LEMC Illinois. Message me to discuss custom order ideas!

More information on Punishers Worldwide here:
https://punisherslemc.com/

Address

Warrenville, IL
60555

Website

Alerts

Be the first to know and let us send you an email when Shed Head Woodworking posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Shed Head Woodworking:

Share