Del's Models and Minis

Del's Models and Minis A division of LDA Creative Concepts. Selling Plastic Scale Models and 3D Printed miniatures/models

Sculpt & files by: Mr. WhoPrinted by: Del’s Models and Minis (licensed)CONUS only. Payment: PayPal Goods & Services onl...
08/21/2026

Sculpt & files by: Mr. Who
Printed by: Del’s Models and Minis (licensed)

CONUS only.
Payment: PayPal Goods & Services only
Shipping: actual shipping from 27105; I use Pirate Ship to keep shipping costs as low as possible.

Fantasy Football (Dwarven)(scatter terrain)

Ok. As I said. I am going to start printing more scatter terrain for RPGs. After the Shrine, I am dusting off these files for the Fantasy Football players. These are pieces for the football field. Including a grand stand for the spectators. He said he was going to do some spectators too, so I may have some of them coming out soon. This would go well with the players that I posted a while back. These were test prints that I did for him. So they were done on my resin printers. Now that I have an FDM printer that does great work, I will be producing those on there. FDM does better for large terrain pieces. The pieces will be lighter, despite the fact that I hollowed these. As you can see, there are some minor defects on these, being test prints. Everything is tweaked now. So I will sell the resin set at half price. They can still easily be used, with just a bit of cleanup. The poor spots are all on the bottom layers. This is supposed to be for 32mm or 38mm scale.

Entire set Fantasy Foodball stadium pieces = $50 per set, plus shipping. See captions of photos for individual piece price. Prices may change as everything balances out.

This is an unpainted 3D print.
As always, I remove supports and do the initial cleanup. Final cleanup, assembly, and painting are yours to enjoy.

If interested, please PM me with any questions or desires.
Thank you.

I was going to set up my small photo booth to take a few pictures. While I was getting things ready, I looked at my Pain...
08/20/2026

I was going to set up my small photo booth to take a few pictures. While I was getting things ready, I looked at my Paint Spray Booth, and the light went off(doesn't happen often). Why not use the Spray Booth as a photo both also? I can reduce to one item, instead of two. Now, my photo booth isn't very large, but it still takes up a cubic foot of space. Super simple. Super cheap if you already have a paint spray booth. Just slide a large piece of paper.....or you can use fabric.....photo background....whatever you want. The light you usually use for painting will work with this also.

Sculpt & files: Primal Collectibles — Tales of Kreyvos collectionPrinted by: Del’s Models and Minis (licensed)CONUS only...
08/20/2026

Sculpt & files: Primal Collectibles — Tales of Kreyvos collection
Printed by: Del’s Models and Minis (licensed)

CONUS only.
Payment: PayPal Goods & Services
Shipping: $5 flat rate from 27105 (single or multiple figures)

Tales of Kreyvos: August edition
Available in 32mm and 75mm scales. As well as some busts.
There are only 2 or 3 that have busts. They will be identified in the caption of each photo. Good crisp detail. I print these on 12K machines.

32mm = $5 each
75mm = $18 each
Bust = $20 each

This is an unassembled, unpainted 3D miniature.
As always, I remove supports and do the initial cleanup. Final cleanup, assembly, and painting are yours to enjoy.

If interested, please PM me with any questions or desires.
Thank you.

Sculpt and files by Aether and Alchemists. 3D Printed here by Del's Models and Minis under license.CONUS only. Paypal Go...
08/19/2026

Sculpt and files by Aether and Alchemists.
3D Printed here by Del's Models and Minis under license.

CONUS only. Paypal Goods and Services only. Buyer pays shipping from 27105.

Thalistra Spellrider
Available in 75mm scale full figure. Bust is also available
75mm (1/24) = $18 each plus shipping
Bust = $25 plus shipping.

At present, for the figures, I have shipping at a flat rate of $5, for however many figures in your order. In other words, if you order 5 models from me, the shipping total is just $5.

This is an unassembled, unpainted 3D printed miniature.
As usual. I remove supports and do initial cleanup. Final cleanup, assembly, and painting is for your pleasure.

Please hit the message me button below with any questions or desires.
Thank you.

, , , , , , , , , , , , , , , , , ,

For my Gaming Friends.Sculpt & files by: OrenlibanePrinted by: Del’s Models and Minis (licensed)CONUS only. Payment: Pa...
08/16/2026

For my Gaming Friends.

Sculpt & files by: Orenlibane
Printed by: Del’s Models and Minis (licensed)

CONUS only.
Payment: PayPal Goods & Services only
Shipping: $6 flat rate from 27105 (single or multiple figures)

Beholder Dice Tower
This piece is 200mm tall.
Shrine = $20 each plus $6 shipping.

This is a single piece, unpainted 3D printed item.
As always, I remove supports and do the initial cleanup. Final cleanup, assembly, and painting are yours to enjoy.

If interested, please PM me with any questions or desires.
Thank you.

Sculpt & files: Primal Collectibles — Tales of Kreyvos collectionPrinted by: Del’s Models and Minis (licensed)CONUS only...
08/07/2026

Sculpt & files: Primal Collectibles — Tales of Kreyvos collection
Printed by: Del’s Models and Minis (licensed)

CONUS only.
Payment: PayPal Goods & Services
Shipping: $5 flat rate from 27105 (single or multiple figures)

Tales of Kreyvos: July edition
Available in 32mm and 75mm scales. As well as some busts.
There are only 2 or 3 that have busts. They will be identified in the caption of each photo. Good crisp detail. I print these on 12K machines.

32mm = $5 each (Oruneth (elephant god), and Aracnor (spider) = $8 each
75mm = $18 each (Oruneth (elephant god), and Aracnor (spider) = $22 each
Bust = $20 each

This is an unassembled, unpainted 3D miniature.
As always, I remove supports and do the initial cleanup. Final cleanup, assembly, and painting are yours to enjoy.

If interested, please PM me with any questions or desires.
Thank you.

Sculpt & files by: OrenlibanePrinted by: Del’s Models and Minis (licensed)CONUS only. Payment: PayPal Goods & Services ...
08/05/2026

Sculpt & files by: Orenlibane
Printed by: Del’s Models and Minis (licensed)
CONUS only.
Payment: PayPal Goods & Services only
Shipping: $5 flat rate from 27105 (single or multiple figures)

Shrine - Totem (scatter terrain)
This piece is 130mm tall, with an 80mm base. I have 4 this size.
I will be resizing this down slightly to fit a 75mm base.

Shrine = $10 each plus $5 shipping.
Let me know if you want one of the existing 80mm base pieces, or if you want the newer resized 75mm base piece.

This is a single piece, unpainted 3D miniature.
As always, I remove supports and do the initial cleanup. Final cleanup, assembly, and painting are yours to enjoy.

If interested, please PM me with any questions or desires.
Thank you.

Sculpt & files: Primal Collectibles — Dragonblade Classics collectionPrinted by: Del’s Models and Minis (licensed)CONUS ...
07/31/2026

Sculpt & files: Primal Collectibles — Dragonblade Classics collection
Printed by: Del’s Models and Minis (licensed)

CONUS only.
Payment: PayPal Goods & Services
Shipping: $5 flat rate from 27105 (single or multiple figures)

True Friends Diorama — Tanis & Flint

The human figure stands at approximately 130mm, placing him at a short 1/12 scale (150mm) or a tall 1/16 scale (120mm).

Parts included:
• Each figure: full body + separate weapons
• Base: 4 pieces
• Tree: 3 pieces

This is an unassembled, unpainted 3D miniature.
As always, I remove supports and do the initial cleanup. Final cleanup, assembly, and painting are yours to enjoy.

If interested, please use the Message Me button below or PM me with any questions or desires.
Thank you.

Sculpt and files by Primal Collectibles. 3D Printed by Del's Models and Minis under license.CONUS only. Paypal Goods and...
07/22/2026

Sculpt and files by Primal Collectibles. 3D Printed by Del's Models and Minis under license.

CONUS only. Paypal Goods and Services only. Buyer pays $5 flat rate shipping from 27105.

From their Legacy of Blood (August 2024) release.

Available in 32mm and 75mm scales. As well as some busts.
There are only 3 that have busts. They will be identified in the caption of each photo. Good crisp detail. I print these on 12K machines.

32mm = $5 each (Dr. Vorthem Rauk scene $10)
75mm = $18 each (Dr. Vorthem Rauk scene $25)
Bust = $20 each

Flat rate of $5 for single, or multiple figures in one shipping.

This is an unassembled, unpainted 3D miniature.
As usual. I remove supports and do initial cleanup. Final cleanup, assembly, and painting is for your pleasure.

Please hit the message me button below, or PM me with any questions or desires.

Thank you.

, , , , , , , , , , , , , ,

Address

5844 Bushberry Court
Winston-Salem, NC
27105

Website

Alerts

Be the first to know and let us send you an email when Del's Models and Minis posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Del's Models and Minis:

Shortcuts

Share

Category