M.P.G - Mont Pic Global

M.P.G - Mont Pic Global Mont Pic Global is your go-to supplier for premium adhesive and HTV. We here for all your vinyl needs
(1)

Want your project to attract attention? Chrome vinyl provides a smooth, reflective appearance. ⚡✨It can be used to creat...
17/09/2026

Want your project to attract attention? Chrome vinyl provides a smooth, reflective appearance. ⚡✨

It can be used to create striking:
✅ Lettering
✅ Decorative decals
✅ Signs
✅ Logos
✅ Craft details

Chrome finishes work especially well when you want a clean, modern or luxurious appearance. 💫

Holographic vinyl reflects different colours as the light and viewing angle change. 🌈✨Use it to add an exciting finish t...
16/09/2026

Holographic vinyl reflects different colours as the light and viewing angle change. 🌈✨

Use it to add an exciting finish to:
🏷️ Decals
📓 Stationery
🎁 Gift packaging
📃 Decorative signs
🛍️ Selected product packaging

Where would you use holographic vinyl? Tell us below! 👇

Give your clothing and fabric projects an eye-catching finish with glitter HTV! 👕✨It is a lovely choice for:🎂 Birthday s...
15/09/2026

Give your clothing and fabric projects an eye-catching finish with glitter HTV! 👕✨

It is a lovely choice for:
🎂 Birthday shirts
💃 Dancewear
🎁 Personalised gifts
🏫 School-event clothing
🎉 Celebration outfits
🛍️ Custom products

Remember to check the recommended pressing instructions before application. 🔥

True or false? 🤔💭“You should use the same cut setting for every type of vinyl.”The answer is: False! ❌Cut settings may d...
14/09/2026

True or false? 🤔💭

“You should use the same cut setting for every type of vinyl.”
The answer is: False! ❌

Cut settings may differ according to:
✅ Vinyl thickness
✅ Material type
✅ Blade condition
✅ Cutting-machine model
✅ Age and condition of the cutting mat

Always perform a test cut before starting the full design. ✂️

A clean surface helps adhesive vinyl bond more effectively. 🧼✨Before applying your design:✅ Remove dust and dirt✅ Make s...
13/09/2026

A clean surface helps adhesive vinyl bond more effectively. 🧼✨

Before applying your design:
✅ Remove dust and dirt
✅ Make sure the surface is smooth
✅ Allow the area to dry completely
✅ Avoid touching the adhesive
✅ Check that the surface is suitable for vinyl

Do not apply vinyl over oil, moisture or loose surface coatings. 🚫

Transfer tape helps move your adhesive-vinyl design from its backing onto the project surface. ✂️For better results:✅ Ch...
12/09/2026

Transfer tape helps move your adhesive-vinyl design from its backing onto the project surface. ✂️

For better results:
✅ Choose a transfer tape suitable for your vinyl
✅ Burnish the design firmly
✅ Peel the vinyl backing away slowly
✅ Position the design carefully
✅ Remove the transfer tape at a low angle

Some textured or specialty vinyl may require a stronger transfer tape. 🔍

Struggling to w**d your vinyl design? 😩Try these tips:✅ Use a sharp w**ding tool✅ Work in a well-lit area✅ Start from an...
11/09/2026

Struggling to w**d your vinyl design? 😩

Try these tips:
✅ Use a sharp w**ding tool
✅ Work in a well-lit area
✅ Start from an outside corner
✅ W**d slowly around small details
✅ Keep the design simple when you’re starting out
✅ Make sure the vinyl has cut correctly

Patience is especially important when working with small lettering and detailed designs. 🙌

**dingVinyl

Don’t forget to mirror your design when cutting Heat Transfer Vinyl! 👚 👕 HTV is generally cut from the reverse side beca...
10/09/2026

Don’t forget to mirror your design when cutting Heat Transfer Vinyl! 👚 👕

HTV is generally cut from the reverse side because the clear carrier sheet holds the design in position during pressing.

Before cutting:
✅ Place the correct side of the HTV on the mat
✅ Select the appropriate material setting
✅ Mirror the complete design
✅ Perform a test cut

Save this reminder for your next HTV project! 📌

Is your cutting machine tearing the vinyl or leaving parts uncut? 😕Your blade may be:🔸 Dirty🔸 Damaged🔸 Blunt🔸 Set too de...
09/09/2026

Is your cutting machine tearing the vinyl or leaving parts uncut? 😕

Your blade may be:
🔸 Dirty
🔸 Damaged
🔸 Blunt
🔸 Set too deep
🔸 Unsuitable for the material

Check the blade and remove any small pieces of vinyl before changing your machine settings. ✂️✅

Before cutting your full design, make a small test cut. ✂️A test cut helps you check whether:✅ The blade depth is correc...
08/09/2026

Before cutting your full design, make a small test cut. ✂️

A test cut helps you check whether:
✅ The blade depth is correct
✅ The pressure is suitable
✅ The vinyl cuts cleanly
✅ The backing remains undamaged
✅ The design w**ds easily

Testing first can save vinyl, time and frustration. 🙌

Address

Unit D2 Spearhead BusinessPark, Cnr Montague Drive & Freedom Way, Montague Gardens, Spearhead Business Park
Cape Town
7441

Opening Hours

Monday 08:00 - 16:30
Tuesday 08:00 - 16:30
Wednesday 08:00 - 16:30
Thursday 08:00 - 16:30
Friday 08:00 - 16:30

Telephone

+27210650741

Website

Alerts

Be the first to know and let us send you an email when M.P.G - Mont Pic Global posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to M.P.G - Mont Pic Global:

Shortcuts

Share

Category