Gifts and Gadgets

12/03/2026

Follow this link to view our catalogue on WhatsApp: https://wa.me/c/27786253846

Learn more about their products and services

21/02/2026

20/02/2026

Semi Cured Gel Nails @ R140
Mini UV/LED Lamp @ R60
Pudo available for customers account
Situated in Paarl

20/02/2026

NG200704 - R140
Whatsapp - 078 625 3846
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)

20/02/2026

NG200627 - R140
Whatsapp - 063 256 7840
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)

20/02/2026

NG200607 - R140
Whatsapp - 063 256 7840
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)

20/02/2026

NG200599 - R140
Whatsapp - 063 256 7840
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)

20/02/2026

NG200588 - R140
Whatsapp - 063 256 7840
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)

20/02/2026

NG200569 - R140
Whatsapp - 063 256 7840
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)

20/02/2026

NG200543 - R140
Whatsapp - 063 256 7840
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)

20/02/2026

NG200494 - R140
Whatsapp - 063 256 7840
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)

20/02/2026

NG200464 - R140
Whatsapp - 063 256 7840
UV/LED Semi Cured Gel Nail Wraps
Instructions
Step 1
Prep Your Nails: Wash your hands then prep your nails by pushing back the cuticles and softly buffing away any dead cuticle skin remaining. Wipe your nails with an alcohol wipe to remove any remaining oils or dirt
Step 2
Choose The Gel Nail Strip/Sticker:
Choose the size of the semi-cured gel nail strip that fits each finger and gently peel off each gel strip piece's protective film before applying to nail. Make sure to press down firmly around the sidewall edges and near the cuticle smile line for a secure fit. Use the warmth of your fingers to smooth out the strip evenly. Please beware to not put gel strip on cuticles or nail sidewalls, it will not stick
Step 3
Trim Off Excess Gel Strips:
Finally, trim away any excess gel strip with nail clippers, scissors, or nail file, filing in a downward motion or under the nail tip.
Then Cure your Gel strip with UV/LED light for 60 - 120 seconds. Smooth the nail tip end by filing desired shape after curing.
Step 4
Apply Top Coat: Optional (But Highly Recommended)
Any Top Coat gel can be applied, eg High gloss / Matt / Rubber / Shimmer top coats according to your preference. Any nail art can be added to create your own desired look with Gel gel nail strips your imagination can be limitless. "Be your own inner nail artist".
Tip: Applying Top Coat gel will make your Gel last longer and longer wear time will be a bonus
Removing Gel Strips
Removing Gel strips is quick and doesn't require soaking or any harsh chemicals.
First, take your cuticle wooden stick and softly lift sides and end edge at cuticle line.
Next, use a few drops of cuticle oil or non-acetone polish remover (Cuticle oil Highly Recommended) and let it run in between your nailbed and the Gel strip. Leave for 60 seconds.
Finally, take your wooden stick and slowly moving from side to side between your nailbed and your Gel strip to "pop" off your Gel strip. Clean nail with alcohol wipe to remove any excess sticky base residue (the more cuticle oil, the better the removal)