Powerbrake

20/07/2026

𝐀𝐫𝐫𝐢𝐯𝐞 𝐖𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞

The journey does not end when the road becomes steep, the vehicle becomes heavily loaded or the terrain becomes demanding.

That is when your braking system matters most.

Powerbrake X-Line systems are engineered for loaded 4x4s, towing, overlanding and demanding driving conditions, helping drivers maintain consistent braking performance where confidence matters most.

Whatever the destination, arrive with confidence.
The world leaders in 4WD brakes.

19/07/2026

𝐂𝐨𝐧𝐭𝐫𝐨𝐥 𝐘𝐨𝐮 𝐂𝐚𝐧 𝐅𝐞𝐞𝐥

A quality brake upgrade should not only perform better.
It should feel better.

Powerbrake X-Line systems are developed to deliver predictable pedal response, consistent performance and greater driver confidence in everyday driving, towing, overlanding and demanding terrain.

The result is control you can feel every time you press the pedal.


________________________________________

18/07/2026

𝐁𝐮𝐢𝐥𝐭 𝐭𝐨 𝐇𝐚𝐧𝐝𝐥𝐞 𝐭𝐡𝐞 𝐇𝐞𝐚𝐭

Loaded vehicles, long descents, towing and repeated heavy braking can generate serious heat.

That is where consistent braking performance matters most.

Powerbrake X-Line systems are engineered to manage demanding operating conditions while maintaining predictable response and confidence behind the wheel.
Because the real test of a brake system is not the first stop.

It is the stops that follow.

17/07/2026

𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐞𝐝 𝐚𝐬 𝐚 𝐒𝐲𝐬𝐭𝐞𝐦

A high-performance brake upgrade is only as strong as the way its components work together, and with your vehicle.

Powerbrake X-Line systems combine our multi-piston calipers, matched brake pads and directional slotted rotors into one fully engineered package. Every component is selected to complement the next, giving you more consistent response, better heat management and dependable braking performance.

Because real performance does not come from one component.
It comes from the complete system.

04/07/2026

26/06/2026

NEW POWERBRAKE KIT FITTED? PLEASE DON’T SKIP THE BEDDING-IN PROCESS.

The bedding-in process is what allows the pad and disc surfaces to establish proper contact and create the correct transfer film on the disc face. This thin layer of pad material is a key part of achieving consistent braking performance, good pedal feel, reduced noise and long disc and pad life.

Step 1: First 300 km
Drive moderately for approximately 300 km after fitment.

During this period:
Use medium brake pedal pressure
Do not test the full performance of the new brakes yet
Avoid hard braking unless it is an emergency
Do not drag the brakes or left-foot brake
Remember that long open-road trips do not really count, because the brakes are not being used often enough

This first stage allows the pads and discs to establish proper surface contact.

Step 2: Controlled heat cycle
After the first 300 km, find a safe, quiet road with no traffic behind you.

Drive slowly for a few kilometres and use the brakes gently to bring them up to moderate temperature. This helps avoid thermal shock.

Then perform 6-8 hard braking applications from freeway speeds down to around 20 to 30 km/h.

Do not bring the vehicle to a complete stop during this process.

Between each stop, accelerate back to freeway speed as safely and quickly as possible. The goal is to build heat into the discs and pads in a controlled way.
You may feel the brake performance reduce slightly and you may notice a little smoke from the pads. This can be normal during bedding-in.

Step 3: Cool them properly
After the bedding stops, drive for at least 10 km using the brakes as little as possible. This allows airflow to cool the discs and pads evenly.
Then park the vehicle and let the brakes cool completely, ideally for at least 30 minutes.

Do not sit stationary with very hot brakes clamped under heavy pedal pressure.

Why this matters
Incorrect bedding-in can lead to poor pad filming, reduced performance, increased noise, brake judder and uneven deposits on the disc surface.

Correct bedding-in helps your Powerbrake kit deliver the performance, pedal feel and consistency it was designed for.

25/06/2026

24/06/2026

Our new M4XS M-Line calipers for the Suzuki Jimny in production…

24/06/2026

There’s something special about watching a project move from concept, to machining, to real-world testing.

Months of design, engineering and manufacturing are starting to come together, and we’re getting very close to launch.

New platform. New solution. Proper Powerbrake engineering.

Coming soon.