22/07/2026
SALE!!!- LAUNCH CREADER CRP129X V3 R4250
Four System Diagnostic Tool:
Supports Reading and Clearing of fault codes on Engine, ABS, Airbags and Transmission system
12 Special Functions:
Oil Reset: Resets the oil change reminder and calculates the optimal oil life change interval after an oil change.
EPB (Electronic Parking Brake) Reset: Resets the brake pads after replacement and ensures the safety and efficiency of the electronic brake system.
SAS (Steering Angle Sensor) Reset: Calibrates the steering angle to zero and clears the previous faulty steering angle sensor memories.
TPMS (Tire Pressure Monitoring System) Reset: Looks up tire sensor IDs from the vehicle's ECU and performs TPMS resets and programming after tire rotations or replacements.
BMS (Battery Management System) Reset: Evaluates the battery charge state, monitors the close-circuit current, registers new battery replacements, and activates the vehicle's battery control state.
ABS Bleeding: Performs the ABS brake bleeding procedure to restore ABS brake sensitivity and get a firm brake pedal.
Injector Coding: Codes new fuel injectors into the ECU so that the cylinders can accurately control and correct fuel injection.
DPF (Diesel Particulate Filter) Regeneration: Clears Particulate Matter (PM) from the DPF filter through continuous combustion oxidation mode to stabilize filter performance.
Throttle Adaptation (ETS): Initializes the throttle actuators to the default state for regulating throttle or idle engine operations more accurately.
AFS (Adaptive Front Lighting System) Reset: Initializes the adaptive headlamp system so it can swivel based on steering wheel angle and vehicle speed.
AdBlue Reset: Resets the urea level or resets after fixing AdBlue/DEF fluid system faults.
Air/Fuel Reset: Resets or learns Air/Fuel ratio parameters to match modified or restored fuel injection operations