Bernina Welkom

19/09/2026

Sometimes the hardest part isn’t sewing — it’s working out what stopped you. 🌸

Maybe a technique isn’t quite coming together.
Maybe you need the right foot, accessory or setting.
Maybe your machine needs some attention.
Or maybe the project you started has simply grown beyond what your current setup can comfortably do.

That’s where we can help.

Bring the project in, show us where you got stuck, and let’s work out the best way forward together.

It might be a simple piece of advice. It might be an accessory, a service or a demonstration. And if your needs have genuinely changed, we can help you look at the right machine too.

Spring Refresh is about getting you sewing again — not leaving another project waiting.

Visit us and let’s get over the hurdle together.

T’s & C’s apply. While stocks last.



GZSPR2026DN03

11/09/2026

You started it with excitement.

Then something got in the way.

Maybe it was time. Maybe something didn’t work the way you expected. Maybe you got stuck and simply never quite got back to it.

Whatever it was, that project is still there.

Bring it back out.

Something new starts next week — and it’s about helping you get sewing again.

What’s stopping you?



GZSPR2026DN01

09/09/2026

Our Annual Trade-In Event has ended.

If you’ve already received a Trade-In quote from us, now is the time to come back and finalise it.

Your quoted Trade-In promotional price will remain valid until 14 September, giving you a few more days to complete your purchase.

If you’ve been meaning to come back to us, don’t leave it too late.

Bring your quote, come in and let’s finalise your Trade-In.

T’s & C’s apply.

04/09/2026

One week left. What are you waiting to create?

The 2026 Annual Trade-In Event ends on 8 September 2026.

If your current machine is holding back what you want to make next, this is your final opportunity during the event to trade in any brand — working or not — and explore your next machine.

Don’t let another project become something you keep putting off.

22/08/2026

WHEN DID "MAKING DO" BECOME PART OF YOUR SEWING?
Rethreading it. Avoiding certain fabrics. Holding something in place that really shouldn’t need holding. Redoing a seam because the machine just didn’t quite cooperate.
Sometimes you don’t realise how much you’ve adjusted your sewing around your machine until you stop and think about it.
A machine should help you enjoy what you make — not quietly dictate what you avoid, what you simplify, or how much patience every project is going to need.
If you’ve been "making do" for longer than you intended, our Annual Trade-In could be a good opportunity to explore what might suit the way you sew now.
Bring in your current machine — any brand, working or not — and come talk to us about your options.
Ends 8 September 2026.
👉 Explore BERNINA South Africa:
https://www.bernina.co.za/?utm_source=social&utm_medium=dealer_social&utm_campaign=GZ-TRD-2026&utm_content=DN03


WANNEER HET "MAAK MAAR ’N PLAN" DEEL VAN JOU NAALDWERK GEWORD?
Weer ryg. Sekere materiale vermy. Iets met die hand in plek hou wat eintlik nie nodig behoort te wees nie. ’n Naat weer doen omdat die masjien net nie lekker saamgewerk het nie.
Soms besef ’n mens nie hoeveel jy jou naaldwerk rondom jou masjien aangepas het totdat jy vir ’n oomblik daaroor d**k nie.
’n Masjien moet jou help om jou naaldwerk te geniet — nie stilweg bepaal wat jy vermy, wat jy eenvoudiger maak, of hoeveel geduld elke projek gaan verg nie.
As jy al langer as wat jy wou "’n plan maak", kan ons Jaarlikse Inruilgeleentheid ’n goeie geleentheid wees om te kyk wat beter by die manier waarop jy vandag werk, kan pas.
Bring jou huidige masjien in — enige handelsmerk, werkend of nie — en kom gesels met ons oor jou opsies.
Eindig 8 September 2026.
👉 Verken BERNINA Suid-Afrika:
https://www.bernina.co.za/?utm_source=social&utm_medium=dealer_social&utm_campaign=GZ-TRD-2026&utm_content=DN03

19/08/2026

If you’re spending more time coaxing your machine along than actually enjoying your sewing, it may be worth looking at your options.

A machine that’s worn out, unreliable or simply no longer suited to what you want to make can turn something you love into unnecessary frustration.

Our Annual Trade-In Event gives you the opportunity to trade in any brand — working or not — and explore selected BERNINA and bernette machines that may better suit what you want to create.

Pop in, message us or give us a call and ask us how the Annual Trade-In works.

Ends 8 September 2026.

https://shop.bernina.co.za/find-a-dealer/?utm_source=social&utm_medium=dealer_social&utm_campaign=GZ-TRD-2026&utm_content=DN02

16/08/2026

14/08/2026

YOUR NEXT MACHINE COULD START WITH THE ONE YOU HAVE.

Ready for your next sewing step? ✨

Trade in your current sewing machine — any brand, working or not — and explore selected BERNINA and bernette machines that could better fit what you want to make next.

Talk to us and let’s find your next fit.

Ends 8 September 2026.

05/08/2026

30/07/2026

EVERY MACHINE HAS ONE MORE STORY. ❤️

The BERNINA and bernette Annual Trade-In Event 2026 is now open.

Your current machine has helped shape everything you have created so far. Now, it could help you begin what comes next.

Trade in any brand of sewing machine, working or non-working, towards a qualifying new BERNINA or bernette machine.

Speak to us about what you would like to create next, and let us help you explore the machine that fits your next step.

29 July–8 September 2026

Terms and conditions apply.