KMA Machines

Startseite
Deutschland
Berlin
KMA Machines

KMA Machines from Berlin - the official FB account! Each model has its intensive development journey, telling its own story with custom artwork.
(1)

All KMA pedal designs start with developing the circuit first, using premium components throughout as we know it makes such a difference to tone.

13/05/2026

Subaquatic Subs with QUEEQUEG 2. 🐋

A simple, one-k**b, all-analog solution for leviathan lows with lightning fast tracking, QUEEQUEG 2 gives you -1/-2 or combined sub octave heft that will shake your windows and rattle your walls. 🫨

demonstrating the enourmous tones available with QUEEQUEG 2.

11/05/2026

GEMINUS is now one year old! ✨ Have you tried it yet?

Since its release last May, we've been seeing our Stereo True Double Tracker show up on pedalboards across the globe and we love to hear how players have been utilising it. 🎸🎸

The guys were hard at work building units and getting them out the door when we came across this very special serial number and had to share. 👹

Find your nearest GEMINUS dealer on our website via the link in bio! 👉

09/05/2026

FUZZLY BEAR² does not FUTZ around! 🐻

Our re-imagining of the classic ‘Jordan Boss Tone’ Silicon-Fuzz, FUZZLY BEAR² delivers vintage '70s tones ranging from a sizzling and chunky overdrive to a furry wall of fuzz with the SKIN/MEAT k**b acting as a bias control. 🥩

Turn the gain fully clockwise and the pedal’s smooth, warm and cosy decay turns into a starved and gated fuzz with visions of a ghost upper octave appearing — perfect for the classic tones of yesteryear. 💥

What riffs/musicians come to mind when you think of fuzz?

06/05/2026

Turn some k**bs, make some noise.

In this virtual pedal play around, we explore the different "muff-style" voicings, clean blend insert position and expression input of the CHIEF DISRUPTOR Fundamental Fuzz / Distortion pedal.

Switching between voicings, you have three distinct flavours of fuzz at your disposal: the classy dynamics and low-to-mid gain of VINTAGE 🔥, the modern and focused TIGHT 💥, or the full-blast, thick, sustaining gain of HEAVY 💣.

The Clean Blend insert position can be set to PRE or POST EQ, letting you take full advantage of the active Bass and Treble controls for further tone shaping while retaining the clarity of your dry signal. ✨

And finally, plugging in an expression pedal lets you sweep the MIDS EQ frequency, resulting in tones ranging from wah-like sounds to faux-phaser swirls. 🌀

Culminating in an all-encompassing tone factory to switch and dial to your heart's content. ❤️‍🔥

04/05/2026

One k**b to rule them all. 🙌

The KMA Machines STEREO HEADPHONE AMP is exactly that: a stereo...headphone...amp... But saying that's all it can do would be selling it short!

Because even though it fundamentally only has one purpose, to provide high-quality headphone monitoring, the many ways it can be rigged up into your setup make it an extremely useful and flexible bit of kit. 🧰

With an Aux input and Bluetooth capability, the STEREO HEADPHONE AMP can work as an effective solution for IEM rigs in live scenarios. Never again ask for "more me" in your monitors—you control the balance! 🧑‍🎤

Or use it as a simple mixer for your backing tracks! The Output Mode switch allows you to dictate whether you want the Aux Mix going to the main outs or not. 🔊

And with dual headphone outs, you can jam with a friend or even use them as extra feeds for camera audio, streaming setups and many other similar situations. 🎧🎧

Did I mention the in-built CLIP LED delivers visual feedback if you’ve set the input a bit too hot? And if you push it, the input pre-amp even yields a very musical and pleasing saturation. With a similar vibe to a blown out or pushed channel strip on a mixing console, don't be afraid to experiment a bit! 👨‍🔬

So whether it's silent at-home practice or flexible monitoring for live use, the STEREO HEADPHONE AMP can do so much more than the name suggests.

What are some creative ways you could see using this pedal? 🎨

01/05/2026

Twice the tone in half the time ⏱️ — ENDGAME's intelligent True Double Tracking algorithm accurately recreates the unmistakable characteristics of this classic studio technique.

Where before you would have to record the same part twice, doing your best to play as closely to the original performance as possible, with ENDGAME you only have to dial in the amount of tightness/looseness as desired, play the part once and let the pedal do the rest! 🤯

Featuring dual Celestion CAB IR simulations + user slots, Ambience control, a Stereo FX Loop and all the I/O you'd ever need, ENDGAME is basically full guitar recording/touring rig in a compact pedal format. 🎛️

How would you wire ENDGAME up in your rig? ⚡

29/04/2026

Unleash the scream! The sizzling harmonics of a good octave fuzz pedal are unmistakable and deserve a spot on every pedalboard. 🎛️

MANDRAKE by KMA Machines couples an all analog upper octave transistor-based fuzz circuit with an active, pre-gain 2nd-order filter section, designed to prepare different instruments' incoming signal for optimised octave tracking.⚡

With independent mix controls for both the DRY and OCT+ signals, MANDRAKE brings the noise without losing definition — perfect for bassists looking to balance the high end shriek with their low end rumble.✨

Are you ready to reap this gnarled root? 🌿

27/04/2026

LOGAN is the neighbourhood kid your parents warned you about. 😈

You know the slingshot sharpshooter with a skateboard and stolen ci******es? LOGAN takes that troublemaker energy and distills it in a pedal format. 🚬🛹

From a lightly overdriven touch to full on tone explosion, plus a 3-band active EQ with a switchable parametric mids section, LOGAN has all the grit of skinned knees and chipped teeth, with ample control to dial in as much dirt as desired. 🎛️

It's time to cause some neighbourhood chaos with LOGAN.💥

22/04/2026

Distortion or Fuzz? (Or both?) 🔥🎸

Do you prefer the high gain HM2 inspired chaos of the WURM 2? 🪱

Or maybe the warm and wooly growl of FUZZLY BEAR 2? 🐾

What about both at the same time? 🤯

However you like it, our AB/Y pedal (available in Mono/Stereo + Active/Passive variations) abides! Letting you instantly and silently switch, sum or split signals to your heart's content. ❤️‍🔥

20/04/2026

The "Swedish Chainsaw" sound of the original Boss HM-2 is known for it's popularity among death metal bands, but did you know it's also surprisingly well suited to shoegaze, prog and RnB? 😮

Basically an HM-2 on steroids, the KMA WURM 2 harnesses the original shred of the now legendary pedal and adds a 4-band active EQ with switchable styles to tailor to your taste, whatever genre it may be! 🎶

So whether you're Prince or Entombed, there's always room on your board for a WURM 2. 🎛️

17/04/2026

Get your tickets to .music for a chance to win our GUARDIAN of the WURM high gain distortion pedal with built-in noise gate! 🔥

On April 24th and 25th, the will bear witness to two days of workshops, masterclasses and panels, over 20 rooms filled with pro audio brands, exclusive performances and gear giveaways!

We'll be attending the Pedalworld showroom and also in room 13 with a host of KMA goodness all plugged in and ready to rock. Come say hi!

See you in the pit. 🤘😈

Adresse

Tabbertstraße 10-11
Berlin
12459

Webseite

https://www.kmamachines.com/

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von KMA Machines erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.