PullFormance Fabrication

PullFormance Fabrication 🏁 Elevating the Performance of Sled Pulling Vehicles
💥 Weight Box to Sled Stops & Everything in Between
🌍 Central CA
🔧

Getting some fresh air
05/03/2026

Getting some fresh air

Rear axle build in motion on Dave Veenendall’s truck — one step closer to rolling!
04/27/2026

Rear axle build in motion on Dave Veenendall’s truck — one step closer to rolling!

5 months waiting on hubs and spindles…Finally, everything’s here. Time to weld up the front and rear axles and get Dave ...
04/14/2026

5 months waiting on hubs and spindles…
Finally, everything’s here.

Time to weld up the front and rear axles and get Dave Veenendall’s new Pro Mod off the chassis table and on the ground.

02/06/2026

Knocking out a batch of 6” stainless weight box rollers.
Built for pull trucks — not shelf art.
Give us a call or send a DM. 📲

12/17/2025

Another Pro Mod 4WD chassis off the welding table 🔧

The offseason grind is CRANKED UP at PullFormance 🔥🔧Motors are shipping out, a fresh Pro Mod 4WD chassis is getting weld...
11/28/2025

The offseason grind is CRANKED UP at PullFormance 🔥🔧
Motors are shipping out, a fresh Pro Mod 4WD chassis is getting welded together on the fixture table, and another Pro Mod build is on deck to get axles built, mounted, and a body hung before it heads up north!

Momentum’s rolling, sparks are flying, and the 2026 season isn’t waiting — and neither are we.

🔥 Yes, we do house calls! 🔥Spending the day building stainless exhaust on Jon Speelman’s “California Haymaker” Hot Farm ...
10/15/2025

🔥 Yes, we do house calls! 🔥
Spending the day building stainless exhaust on Jon Speelman’s “California Haymaker” Hot Farm so it can make its return to the track at the Golden State Invitational presented by MLM Motorsports in Madera, CA, November 7th & 8th! 💪🛠️

The results on paper don’t always tell the full story… but the data does. 💻📊This weekend we tested a new part we’ve been...
10/01/2025

The results on paper don’t always tell the full story… but the data does. 💻📊
This weekend we tested a new part we’ve been developing for months—something we believe will be a true game changer in the sled pulling world. ⚡

We’re working to turn sled pulling from just a skill into a science—using data, innovation, and hard work to push the sport forward. Still a lot of testing ahead, but blazing new trails is what it takes to do what’s never been done. 💪🛠️

Huge thanks to the Soza Memorial Truck Show and MLM Motorsports for a great weekend. 👊

09/03/2025

10 DAYS • 9 STATES • SCHEID 2025 🔥

From hanging at Scheid Diesel in Effingham with Brad Ingram, to a tour of Browell Bellhousing from Brian Browell himself, to checking out Kent Crowder’s House of Horsepower—we soaked up every bit of horsepower knowledge we could before rolling into Wagler Motorsports Park.

Lost a turbo on the test hook… but that’s when this community showed its heart. Competitors like Brad & Brady Ingram, Keith Witt, Ferenc Vegh, and Matt Penn jumped in without hesitation to help us bolt on a new charger and get back in the fight.

Ended the weekend with a 10th place finish out of 17 of the toughest 3.6” trucks in the country. 2nd-10th place separated by 7 feet. Proud moment for a crew of California guys chasing the dream. 🇺🇸

Big thanks to everyone who had our back—this is what pulling’s all about. 💨

Spent a couple days in Donnie Reeve’s toy box getting the wiring dialed and data acquisition set up on all the RTCI Moto...
07/17/2025

Spent a couple days in Donnie Reeve’s toy box getting the wiring dialed and data acquisition set up on all the RTCI Motorsports trucks. Wishing the team luck in Weiser, Idaho—bring some hardware home to NorCal! 🏆

Address

4425 W 300 S
Lyons, IN
47443

Telephone

(209)7127749

Website

Alerts

Be the first to know and let us send you an email when PullFormance Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to PullFormance Fabrication:

Shortcuts

Share

Category