SFL Designs

Call Directions Website

SFL Designs Designing to 3D Printing, we've got you covered!

Reach out to us if you have a custom part that you need designed or 3D printed.

We have a team of FDM printers that can print in PLA, ABS, ASA and PETG. We are here to help you along the way to success.

We hid some easter eggs in FleetWorks.They are tucked around the tool where you only find them by poking around. We are ...
11/21/2026

We hid some easter eggs in FleetWorks.

They are tucked around the tool where you only find them by poking around. We are not saying where. We are not saying how many.

FleetWorks is our free printer maintenance tracker. Add the printers you own and it spreads each maker schedule week by week, with due work, parts and costs on one dashboard.

Here is the contest: three SFL Designs gift cards are up for grabs. First person to find every egg gets $100, second gets $50, third gets $25.

One rule: I hid them, so I am out. The cards go to customers.

Your finds are recorded on your account as you go, so there is no honor system and no screenshots to send in. When someone completes the set, we will know, and we will announce the winner here.

FleetWorks is free with a free SFL Designs store account. If you have not tried it yet, this is a good excuse to click on everything.

Check out the link in the comments below.

Happy hunting.

Modeled a perfect fit? Congratulations. You've designed a permanent press fit.Two parts modeled at exactly the same size...
11/19/2026

Modeled a perfect fit? Congratulations. You've designed a permanent press fit.

Two parts modeled at exactly the same size will not fit when printed. This post shows how to design the gap on purpose and test it small, so two-part fits stop being luck and start being repeatable.

Read the full post. Check out the link in the comments below.

What's your go-to clearance for a slip fit, or are you still sanding and praying?

Your 0.4 nozzle is a fine pen. Some parts want a fat marker.A bigger nozzle trades fine detail for speed and chunkier, s...
11/17/2026

Your 0.4 nozzle is a fine pen. Some parts want a fat marker.

A bigger nozzle trades fine detail for speed and chunkier, stronger extrusions, and for functional parts, that trade is often the smart one. This post lays out when the swap earns its keep and when it doesn't.

Read the full post. Check out the link in the comments below.

What's the biggest nozzle you've run, and what did you print with it?

A straight seed-pixel matrix depends on controlled routing, not luck.Seed Pixel Pipe Matrix clips create repeatable wrap...
11/17/2026

A straight seed-pixel matrix depends on controlled routing, not luck.

Seed Pixel Pipe Matrix clips create repeatable wrap points on PVC or EMT. The wire is secured at the clip with a small zip tie, and the clip can be rotated to adjust tension before finalizing the run. Use one clip at the start and end of a run and two back to back everywhere else, then brace the frame if the tension starts bending it.

Clips come in 1in and 2in standoffs from the pipe, for seed pixels with 2in or greater spacing. Once the tension is set, a screw through the pilot hole locks a clip so it won't rotate over the season.

Are you building a matrix, an outline, or another pipe-based seed layout?

Check out the link in the comments below.

The layout is honest, the groups are built, the ports are fed. This afternoon the models dance for the first time, and i...
11/14/2026

The layout is honest, the groups are built, the ports are fed. This afternoon the models dance for the first time, and it starts with one song.

Opening a sequence, adding the music, laying down timing marks, and placing your first effects on the models you built. Small, simple, and finished beats grand and stuck, every single time.

Read the full post. Check out the link in the comments below.

What was the first song you ever sequenced, or the one you want to start with?

The controller is the hardest-working box in your yard, and the least understood.This morning: what it actually does, th...
11/14/2026

The controller is the hardest-working box in your yard, and the least understood.

This morning: what it actually does, the ports versus pixels-per-port math that decides how much one box can run, and when a receiver board across the yard earns its keep instead of another long cable run. Genius, Kulp, Vivid, Baldrick, Falcon, in plain words.

Read the full post. Check out the link in the comments below.

How far is your farthest prop from the controller that runs it?

A small tree still needs a planned load path from topper to base.The Mini Me kit combines the topper, pole and leg inter...
11/14/2026

A small tree still needs a planned load path from topper to base.

The Mini Me kit combines the topper, pole and leg interfaces, ring connections, and tension points needed for a compact seed-pixel tree. Before assembly, lay every printed part out by function. Then show the finished tree beside close-ups of the topper, base, and perpendicular mounts.

The kit's 4-inch topper routes up to 32 strings, and the printed parts are all in the box: topper and cover, base, six Perpendicular Pipe Mounts, and a full set of Seed Pixel Tension Clips (you supply the pipe, hardware, and bungees).

Would you rather see a full assembly walkthrough or a parts-and-hardware checklist?

Check out the link in the comments below.

If your Fusion 360 browser looks like a junk drawer, this is probably why.Bodies are shapes; components are parts. They ...
11/12/2026

If your Fusion 360 browser looks like a junk drawer, this is probably why.

Bodies are shapes; components are parts. They are not the same thing, and mixing them up is how assemblies turn into archaeology. This post covers when each one belongs, and the one habit that keeps everything clean.

Read the full post. Check out the link in the comments below.

How many loose bodies are floating in the design you're working on right now?

A controller box should be easy to understand six months after you built it.SnapMount Pro 350 creates an organized contr...
11/12/2026

A controller box should be easy to understand six months after you built it.

SnapMount Pro 350 creates an organized controller and LRS-350 power-supply assembly with detachable mounting points and printed location guidance. The advantage is serviceability: parts have a defined position, swaps are cleaner, and the box does not turn into a one-off puzzle.

Every push-pin location is UV-printed right on the mount, and the snap-fit base locks onto the LRS-350. This Falcon version covers the F16 V2 through V5 controllers and expansion boards, F8 distro boards, SRx1 smart receivers, and Raspberry Pi, printed in ASA.

Which controller platform should we profile next: Falcon, Genius, Baldrick, or Vivid?

Check out the link in the comments below.

Address

PO Box 472
Saint Clair, MO
63077

Alerts

Be the first to know and let us send you an email when SFL Designs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category

Nearby shops