Flying Leathernecks Scale Creations

Flying Leathernecks Scale Creations Flying Leathernecks Scale Creations Produces
3D printed Resin focusing on USN/USMC Ordnance and USMC Aircraft Decals.

With a few exceptions, all products are made in the United States and are designed and/or manufactured in house.

For our friends overseas.The large box on the bottom is headed to BNA Modelworld in Australia.The box in the middle is o...
09/06/2026

For our friends overseas.

The large box on the bottom is headed to BNA Modelworld in Australia.

The box in the middle is one of two headed to Hannants in the UK.

The box on top is one of two headed to F4Dable Models in Malaysia.

In addition to these, I'm in the process of packing a box for The 48ers in Cyprus and I have three full postal totes full of direct orders, with a 4th tote started.

I appreciate your patience as it has been a major challenge keeping up! My stock was obliterated and getting everything back into production and packed to fill orders took quite a bit of time.

For context, these boxes are a total of almost 70 pounds of Flying Leathernecks items, with the bottom box measuring 26 x 16 x 16 inches!

NEW 1/48 resin releases now on the site!
08/29/2026

NEW 1/48 resin releases now on the site!

A few more 1/32 sheets in the queue.FL32001 and FL32002 are completely done and ready to be sent for quotes (Again, stil...
08/28/2026

A few more 1/32 sheets in the queue.

FL32001 and FL32002 are completely done and ready to be sent for quotes (Again, still no exact timeline).

For FL32007, I'm still trying to decide exactly which options to include. I hope to have them finalized within the next week or two.

For FL32008, all that is left to finish are the landing gear placards. Once those are done, this sheet will be ready as well.

No specific time line for the release of this sheet, but it is one of several 1/32 and 1/35 sheets I plan on releasing a...
08/28/2026

No specific time line for the release of this sheet, but it is one of several 1/32 and 1/35 sheets I plan on releasing as soon as I am able.

First part of the plan is to get all of the artwork drawn, and the sheets print ready. Second part is to send each for quotes. Third part is to send each to print as funds dictate.

Now, before anyone asks "what about 72nd scale"? FL72003 has not done well.....at all. So, until that changes, 72nd scale probably won't get another sheet for a bit.

Oddly enough, I actually sell a lot of 32nd sheets, so those will get a higher priority for now.

We just received the files for the 1/35 OH-58D cockpit from Flying Frog.This will go into production later tonight after...
08/27/2026

We just received the files for the 1/35 OH-58D cockpit from Flying Frog.

This will go into production later tonight after Tanya and I return from the Braves/Dodgers game!

Not sure of the price yet. I'll discuss that with FF tomorrow.

NEW 1/32 Releases now up on the site!New 1/48 releases will be up tomorrow
08/27/2026

NEW 1/32 Releases now up on the site!

New 1/48 releases will be up tomorrow

So, this is still in the "trial and development" stage, but Sandro got a 3D scanner and decided to use his Meng Super Ho...
08/27/2026

So, this is still in the "trial and development" stage, but Sandro got a 3D scanner and decided to use his Meng Super Hornet as the first test bed. Still a lot of work to do!

Once he gets the work flow down, and we're happy with the end piece, we'll start getting some seamless intakes into the line up.

I can already hear the printers humming while they print 32nd scale F/A-18 Legacy Hornet Intakes!! đŸ˜€

Pure 3D printing joy is getting the settings right on the first try when using a new resin!It doesn't happen very often,...
08/27/2026

Pure 3D printing joy is getting the settings right on the first try when using a new resin!

It doesn't happen very often, so it's really satisfying when it does.

Sunlu ABS Like Solid White on a Mars 3 Pro.

Chitubox V1.9.5 (yes, I prefer using this older version for my Mars 3/3 Pro printers)
05 layer height
Bottom layer / transition layer - 6 / 6
Exposure 2.65 seconds
Bottom Exposure 30 seconds
Rest before lift 1.0
Rest after lift .5
Rest after retract 1.5
Bottom lift / lift distance 6 / 2
Bottom retract / retract distance 2 / 6
60/180
60/180
180/60
180/60

1/32 TA-4J intakes for the Hasegawa kit.Designed by Marcel HohlThis was a quick test print to check supports and orienta...
08/25/2026

1/32 TA-4J intakes for the Hasegawa kit.

Designed by Marcel Hohl

This was a quick test print to check supports and orientation. After a few adjustments, a second test print is in progress, this time in Sunlu ABS like Solid White resin. Parts for the compressor blades are also being printed.

Address

401 Willow Lane
Temple, GA
30179

Opening Hours

Monday 4am - 3pm
Tuesday 4am - 3pm
Wednesday 4am - 3pm
Thursday 4am - 3pm
Sunday 4am - 3pm

Website

Alerts

Be the first to know and let us send you an email when Flying Leathernecks Scale Creations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Flying Leathernecks Scale Creations:

Shortcuts

Share

Category